Phrozen Dental Cure+: The Post-Curing Unit Built for Chairside and Lab Volume
Triple wavelength LEDs at 110W combine with flash curing and a 60°C heated enclosure for validated cure cycles across the full Phrozen Dental resin range. 15+ pre-loaded material profiles, with cure times from five minutes for surgical guides to eleven minutes for crowns and bridges.
- Phrozen Dental Cure+ curing unit
- 15+ pre-loaded material profiles
- Validated for Sonic CS+, LS+, XL 4K Plus
See the Cure+ up close
Scroll for more views
Why the Cure+
-
1Triple wavelength, no matching required
365, 385, and 405nm LEDs run simultaneously across 36 LEDs at 110W, ensuring complete polymerisation across the full Phrozen Dental resin range and compatible third-party materials without matching the unit to a specific wavelength.
-
2Flash curing and a 60°C heated enclosure
High intensity bursts penetrate deeper into the printed part without overcuring the surface, and the heated enclosure accelerates polymer bonding for the final strength and biocompatibility a clinical part needs.
-
315+ pre-loaded material profiles
Select the material on the 5 inch touchscreen and the correct time, temperature, and wavelength combination is applied automatically, removing the guesswork from post-curing.
Built for validated dental post-curing
The Cure+ suits any Phrozen dental printer owner who needs validated, repeatable post-curing rather than a generic hobby UV station, whether adding curing capacity to an existing setup or completing a new one.
Dental clinics
Chairside post-curing for surgical guides and modelsDental laboratories
Batch curing matched to lab print volumeCS+, LS+ and XL 4K Plus owners
Adding validated curing capacity to an existing printerClear aligner providers
Consistent cure cycles across aligner and retainer models
What the Cure+ delivers
Every specification on the Cure+ is oriented toward validated, repeatable post-curing rather than a one size fits all UV chamber.
365, 385 and 405nm, 36 LEDs, 110W
Triple wavelength output simultaneously covers the full Phrozen Dental resin range without requiring the user to match unit to material.
Flash curing technology
High intensity bursts penetrate deeper into the printed part without overcuring the surface.
60°C heated chamber
Accelerates polymer bonding for the final mechanical strength and biocompatibility a clinical dental part requires.
5 to 11 minutes by indication
5 minutes for surgical guides, 10 minutes for occlusal splints, 11 minutes for crowns and bridges.
15+ pre-loaded on touchscreen
Select the material and the correct time, temperature and wavelength combination is applied automatically.
CS+, LS+ and XL 4K Plus validated
Designed to complete the post-processing workflow for the full Phrozen dental printer range.
Technical overview
Specifications confirmed by Phrozen Technology. The Cure+ is stocked by 3D Cast, Australia's official Phrozen distributor.
| Specification | Detail |
|---|---|
| Wavelengths | 365, 385, 405nm simultaneous Triple |
| LEDs | 36 LEDs, 110W output |
| Curing method | Flash curing |
| Enclosure | 60°C heated, fully enclosed |
| Material profiles | 15+ pre-loaded |
| Validated cure times | 5 min guides, 10 min splints, 11 min crowns |
| User interface | 5 inch touchscreen |
| Dimensions | 23 x 33.5 x 26cm |
| Weight | 7.3kg |
| Compatibility | Sonic CS+, LS+, XL 4K Plus |
| Australian stock | Free shipping Australia wide In Stock |
Curing unit alone, or matched with Wash+
Both options ship from Australian stock with free shipping and full Phrozen warranty.
- Phrozen Dental Cure+ curing unit
- 15+ pre-loaded material profiles
- Validated for Sonic CS+, LS+, XL 4K Plus
- Phrozen Wash+ dual tank washing station
- Phrozen Cure+ curing unit
- Small Bucket Set included
Meet Luke, founder of 3D Cast
I've been 3D printing since 2016. In 2024 I launched 3D Cast's online store as Phrozen Technology's official Australian distributor, moving on from our old 3D printing service. In mid-2026 we expanded into the dental industry, with the goal of giving dental professionals the best 3D printing products available. Got a question? You're talking straight to me, not a call centre.
Shipping, returns and warranty
Free shipping
Free shipping Australia wide via Australia Post, whichever provides the best service for your location. Ships from our warehouse in Bairnsdale, Victoria.
Returns
Returns are available for products that have a manufacturing defect.
Warranty
Full Phrozen manufacturer warranty on hardware, software and firmware. Consumable parts are not covered.
Full warranty policy →Australia's home for Phrozen Dental
760 customers have ordered through 3D Cast. Orders ship to every state and territory from our warehouse in Bairnsdale, Victoria.
Rather than just send it, they contacted me and asked if the order was right. I was able to correct it. Great customer service.
My order was processed promptly. I have found a great supplier here in 3D Cast and they will have my future business.
Great range and they actually know what they are selling. Got good advice before I bought.
Official Phrozen distributor
Full manufacturer warranty, genuine Phrozen spare parts, and direct brand access.
Stocked in Australia
No international shipping wait and no customs complications. Ships from Bairnsdale, Victoria.
Dental specific support
Direct technical support for clinical and lab workflows, not a generic hardware call centre.
Dave, Google Review
"Great service, great range of product. Support is exceptional. Highly recommended."
Common questions about the Cure+
What dental clinics and labs ask most before adding the Cure+ to their post-processing workflow.
What curing modes does the Cure+ support?
The Cure+ supports three curing modes: Flash Cure (high-intensity flashing for deep, fast curing), Heat Cure (60°C controlled heating for tighter polymer bonding), and Normal Cure (standard UV curing for materials that do not require heat or flash). Most appliances use Flash Cure combined with Heat for optimal results.
How long does it take to cure a surgical guide?
A surgical guide cures in just 5 minutes using Flash Cure and Heat mode. Crown and bridge restorations take 11 minutes, occlusal splints 10 minutes, hybrid dentures 11 minutes, dental models 10 to 15 minutes, denture bases 20 minutes, and gingiva masks 20 to 25 minutes on Normal Cure.
Is the Cure+ compatible with third-party dental resins?
Yes. The Cure+ ships with validated curing profiles for over 15 dental resin materials including the full Phrozen Dental range. It is also compatible with a wide range of third-party dental resins. Check Phrozen's validated resin profile list for confirmed third-party compatibility.
What is flash curing and why does it matter?
Flash curing uses high-intensity bursts of UV light to cure deeper into the printed appliance faster than standard continuous UV exposure. This delivers more thorough curing without the risk of overcuring the outer surface, which is critical for achieving biocompatibility standards in clinical-grade dental appliances.
Why does the Cure+ have a heated enclosure?
The 60°C heated enclosure accelerates the curing reaction and enforces tighter polymer chain bonding within the resin. This produces superior mechanical properties including higher strength, better flexibility characteristics, and improved biocompatibility compared to UV-only curing at room temperature.
How many validated material profiles does it include?
The Cure+ includes validated curing profiles for over 15 materials from leading dental resin manufacturers. Profiles are pre-loaded on the 5 inch touchscreen. Simply select your material and the correct cure time, wavelength, and temperature settings are applied automatically.
What power supply does it require — is it compatible with Australian power?
Yes. The Cure+ operates on 100 to 240V at 50 to 60Hz, making it fully compatible with Australian standard power supplies. No transformer or adapter is required.
Can I use the Cure+ with a Phrozen Wash+ in the same workflow?
Yes. The Cure+ and Wash+ are designed to work together as a complete post-processing workflow. After printing, place your appliances in the Wash+ for cleaning, then transfer directly to the Cure+ for post-curing. Both units are available from 3D Cast with same-day dispatch from Australian stock.
Is this unit shipped from Australia?
Yes. 3D Cast holds the Cure+ in local Australian stock. Orders placed before 2PM AEST ship same day with no international shipping delays, no customs complications, and full local support from our team.
What warranty and support is available?
The Cure+ is covered by Phrozen's standard warranty. As Australia's official Phrozen distributor, 3D Cast provides local warranty support and technical assistance. Contact our team directly for warranty claims, troubleshooting, or setup guidance.
Ready to complete your post-processing setup?
Both Cure+ options are in stock with free shipping Australia wide. Order direct from Australia's official Phrozen distributor.