Phrozen Dental Wash+: The Washing Station Built for Chairside and Lab Volume
Three washing methods including simultaneous dual tank loading for up to 24 models at once, with five-minute cycles, five adjustable speed levels, and 200 stored profiles. A plate holder that fits every Phrozen dental build plate without adapters.
- Phrozen Dental Wash+ washing station
- Small Bucket Set included
- Validated for Sonic CS+, LS+, XL 4K Plus
See the Wash+ up close
Scroll for more views
Why the Wash+
-
1Three washing methods in one unit
Run a two-stage IPA wash for thorough resin removal, separate biocompatible parts from non-biocompatible parts in the same cycle, or load both tanks simultaneously to clean up to 24 dental models at once using the full build plate capacity.
-
2Five-minute cycles, 200 stored profiles
Once parameters are set for each resin in the workflow, starting the next cycle is a matter of selecting the material and confirming, with five adjustable speed levels from 250 to 350 RPM to match wash intensity to the indication.
-
3Fits every Phrozen dental build plate
The stainless steel plate holder is compatible with the CS+ standard and mini plates, the LS+ standard and large plates, and the XL 4K Plus, with no adapters or additional hardware required.
Built for validated dental post-processing
The Wash+ suits any Phrozen dental printer owner who needs a washing station sized and validated for the dental range, whether adding wash capacity to an existing setup or completing a new one.
Dental clinics
Chairside washing for models and surgical guidesDental laboratories
Batch washing matched to lab print volumeCS+, LS+ and XL 4K Plus owners
Adding a validated wash station to an existing printerClear aligner providers
Consistent wash cycles across aligner and retainer models
What the Wash+ delivers
Every specification on the Wash+ is oriented toward matched, repeatable dental post-processing rather than a generic hobby wash tank.
Dual tank, three washing methods
Two-stage IPA wash, biocompatible and non-biocompatible separation, or simultaneous dual-tank loading for up to 24 models at once.
Approximately 5 minutes
Five adjustable speed levels from 250 to 350 RPM in 25 RPM increments match wash intensity to the resin and indication.
200 stored washing profiles
Set parameters once per resin, then select the material and confirm on the touchscreen for every following cycle.
Fits the full Phrozen dental range
The stainless steel plate holder fits CS+ standard and mini plates, LS+ standard and large plates, and the XL 4K Plus, without adapters.
Small Bucket Set included
Limits solvent volume to a maximum of 4 litres per tank, reducing IPA consumption across high-volume runs.
CS+, LS+ and XL 4K Plus validated
Pairs directly with the Phrozen Dental Cure+ for a complete post-processing setup.
Technical overview
Specifications confirmed by Phrozen Technology. The Wash+ is stocked by 3D Cast, Australia's official Phrozen distributor.
| Specification | Detail |
|---|---|
| Tank system | Dual tank 3 methods |
| Washing methods | Two-stage IPA, biocompatible separation, dual simultaneous (up to 24 models) |
| Cycle time | Approximately 5 minutes |
| Speed levels | 5 levels, 250 to 350 RPM in 25 RPM increments |
| Stored profiles | 200 |
| Solvent volume | Up to 4L per tank (Small Bucket Set) |
| Plate compatibility | CS+, LS+ and XL 4K Plus build plates |
| Compatibility | Sonic CS+, LS+, XL 4K Plus |
| Australian stock | Free shipping Australia wide In Stock |
Washing station alone, or matched with Cure+
Both options ship from Australian stock with free shipping and full Phrozen warranty.
- Phrozen Dental Wash+ washing station
- Small Bucket Set included
- Validated for Sonic CS+, LS+, XL 4K Plus
- Phrozen Wash+ dual tank washing station
- Phrozen Cure+ curing unit
- Small Bucket Set included
Meet Luke, founder of 3D Cast
I've been 3D printing since 2016. In 2024 I launched 3D Cast's online store as Phrozen Technology's official Australian distributor, moving on from our old 3D printing service. In mid-2026 we expanded into the dental industry, with the goal of giving dental professionals the best 3D printing products available. Got a question? You're talking straight to me, not a call centre.
Shipping, returns and warranty
Free shipping
Free shipping Australia wide via Australia Post, whichever provides the best service for your location. Ships from our warehouse in Bairnsdale, Victoria.
Returns
Returns are available for products that have a manufacturing defect.
Warranty
Full Phrozen manufacturer warranty on hardware, software and firmware. Consumable parts are not covered.
Full warranty policy βUser guide
Digital manual coming soon. In the meantime, our team can walk you through setup and operation.
Ask us a question βAustralia's home for Phrozen Dental
760 customers have ordered through 3D Cast. Orders ship to every state and territory from our warehouse in Bairnsdale, Victoria.
Rather than just send it, they contacted me and asked if the order was right. I was able to correct it. Great customer service.
My order was processed promptly. I have found a great supplier here in 3D Cast and they will have my future business.
Great range and they actually know what they are selling. Got good advice before I bought.
Official Phrozen distributor
Full manufacturer warranty, genuine Phrozen spare parts, and direct brand access.
Stocked in Australia
No international shipping wait and no customs complications. Ships from Bairnsdale, Victoria.
Dental specific support
Direct technical support for clinical and lab workflows, not a generic hardware call centre.
Dave, Google Review
"Great service, great range of product. Support is exceptional. Highly recommended."
Common questions about the Wash+
What dental clinics and labs ask most before adding the Wash+ to their post-processing workflow.
How many washing methods does the WASH+ support?
The WASH+ supports three methods. The first is a two-stage dirty IPA then clean IPA wash that optimises solvent usage. The second separates FDA biocompatible parts from non-FDA parts in a single cycle. The third is a double plate wash that can clean up to 24 dental models in one cycle using the 9.3 inch plate capacity.
How long does a wash cycle take?
The WASH+ completes a full wash in approximately 5 minutes, removing resin residue thoroughly from printed dental parts.
What build plates are compatible with the WASH+?
The WASH+ is compatible with all Phrozen Dental Series build plates. This includes the Sonic CS+ standard and mini plate, Sonic LS+ standard and large plate, and the Sonic XL 4K PLUS and XL 4K 2022 large plate. The stainless steel plate holder is included.
What is the difference between the standard bucket and the short bucket?
The standard bucket holds up to 7L per tank and suits high volume workflows. The short bucket holds up to 4L per tank, uses less solvent, and makes refilling faster and more convenient. Both configurations use the same machine base.
How many washing profiles can the WASH+ store?
The WASH+ stores up to 200 washing profiles. You configure each profile once with your preferred speed and time settings, save it, and then simply select the resin name to start your next cycle.
What solvent does the WASH+ use?
The WASH+ is designed for use with IPA (isopropyl alcohol). Always follow your resin manufacturer's safety data sheet for solvent handling and disposal.
Does the WASH+ work with non-IPA cleaning solutions?
The WASH+ is designed and validated for use with IPA. Some users operate the WASH+ with dedicated resin cleaning solutions such as Monocure3D Resinaway, which is available at 3D Cast and offers a safer handling profile than IPA with comparable cleaning performance on standard dental resins. Always follow the resin manufacturer's post-processing recommendations and the cleaning solution's safety data sheet for handling and disposal requirements.
Is the Phrozen WASH+ available in Australia with local support?
Yes. The Phrozen WASH+ is stocked locally by 3D Cast, Australia's official Phrozen distributor. Local stock means no international shipping delays and direct access to technical support from the 3D Cast team for setup, profile configuration, and troubleshooting.
Ready to complete your post-processing setup?
Both Wash+ options are in stock with free shipping Australia wide. Order direct from Australia's official Phrozen distributor.