Phrozen Mega Cure S — In Stock | 3D Cast

Resin Curing Station · Large Format

Phrozen Mega Cure S: Large Format Curing, In Stock Now

Name: Phrozen Mega Cure S
Brand: Phrozen
Price: 750.00 AUD
Availability: InStock
Rating: 5 (16 reviews)

A large format 405 nm UV curing station with a 360° transparent rotating turntable and dual 1,700 RPM drying fans. Cure models up to Ø35 x 30 cm with even light exposure and no under-cured patches. In stock now with official Phrozen warranty, shipped from Bairnsdale, Victoria.

Unboxing the Phrozen Mega Cure S

Cure Only

Phrozen Mega Cure S

$750 AUD inc. GST

Phrozen Mega Cure S curing station
360° transparent rotating turntable
Dual 1,700 RPM drying fans
Detachable internal rack

In stock now

Official Phrozen warranty · Ships from Victoria

See all bundles →

Ø35x30cm

Max Curing Size

360°

Rotating Turntable

1,700 RPM

Dual Drying Fans

760+

AU Customers Served

Gallery

See it up close

Phrozen Mega Cure S resin curing station with glowing interior on light grey workshop shelf

Large detailed resin figure curing on the rotating turntable inside the Phrozen Mega Cure S

Two levels of large resin prints curing simultaneously on the detachable rack inside the Phrozen Mega Cure S

Hand pressing the control panel on the Phrozen Mega Cure S with a large resin model visible through the transparent door

Split view of the Phrozen Mega Cure S showing the exterior on one side and interior with a large resin model curing on the other

Scroll for more views

Why the Mega Cure S

1

A curing chamber built for Ø35 x 30 cm parts
Suited to large format Phrozen printer build volumes including the Mega 8K series and Sonic Mighty range, where compact desktop curing stations simply don't fit.
2

360° rotation with a transparent turntable
Even UV exposure across every surface eliminates the directional bias that leaves single-source curing stations with tacky, under-cured patches, and you can watch the cycle without opening the chamber.
3

Dual 1,700 RPM fans dry before they cure
Removes residual cleaning solvent from the model surface before UV exposure begins, so parts don't finish with a tacky, incompletely cured layer.

Who it is for

Built for Mega series output, not desktop leftovers

Compact curing stations built for desktop printers cannot accommodate Mega series build volumes. The Mega Cure S exists for exactly the setups where that becomes a problem.

🔆

Mega series owners

Sized for Sonic Mega 8K S, Mega 8K V2, and Sonic Mighty Revo 16K MAX build volumes

🏭

Production studios

Batch cure multiple large parts on the detachable rack in a single cycle

🦷

Dental labs

Consistent large format curing for models and appliances

⚙️

Engineers

Dial in cure time for engineering grade and castable resins

🎭

Cosplay and prop makers

Cure full scale armour panels too large for compact stations

🚂

Model makers

Cure large scale parts without splitting the job across multiple cycles

Phrozen Mega Cure S UV curing station for large format MSLA resin 3D printing, stocked in Australia

Key features

What makes the Mega Cure S different

Built for large format printers and high-volume workflows. The compact curing stations used for desktop printers cannot accommodate Mega series build volumes.

Curing

360° transparent rotating turntable

Delivers even UV exposure across all model surfaces simultaneously, eliminating the directional bias that leaves parts under-cured on one side.

Monitoring

Watch the cycle without opening it

The transparent turntable lets you visually confirm the curing process without opening the chamber or interrupting the cycle.

Drying

Dual 1,700 RPM fan drying

Removes residual cleaning solution from the model surface before UV exposure begins, preventing a tacky, under-cured surface.

Workflow

Three operating modes

Dry only, cure only, or dry then cure sequentially, matching the standard workflow for prints going straight from wash to cure.

Capacity

Detachable internal rack

Two levels of parts cure in the same cycle, or remove the rack entirely for a single large model.

Size

Ø35 x 30 cm maximum curing size

Covers the full build volume of the Mega 8K series and Sonic Mighty range.

Unboxing

Phrozen Mega Cure S unboxing

See what's in the box and how the Mega Cure S sets up straight out of packaging.

Specifications

Technical overview

Full specifications confirmed by Phrozen Technology. The Mega Cure S is stocked by 3D Cast, Australia's official Phrozen distributor.

Specification	Detail
Max curing size	Ø35 x 30 cm Large Format
UV wavelength	405 nm
Curing method	360° transparent rotating turntable
Fan speed	1,700 RPM dual fans
Operating modes	Dry only, cure only, dry then cure
Curing timer	1 to 120 minutes (recommended max 30 minutes per cycle)
Max power	70W
Input voltage	AC 100–240V, 50/60 Hz
Machine dimensions	39.5 x 47.5 x 48.6 cm
Weight	15 kg

Choose your setup

Three ways to get started

All options ship from Australian stock with full Phrozen warranty.

Cure Only

$750 AUD inc. GST

The curing station on its own

Phrozen Mega Cure S curing station
360° transparent rotating turntable
Dual 1,700 RPM drying fans
Detachable internal rack

PHMCS01

Meet Luke, founder of 3D Cast

I've been 3D printing since 2016. In 2024 I launched 3D Cast's online store as Phrozen Technology's official Australian distributor, with the goal of giving Australian hobbyists, makers, and professionals fast access to the best 3D printing hardware available, backed by real technical support from people who use the machines themselves. Got a question? You're talking straight to me, not a call centre.

Luke Macwhirter — Founder, 3D Cast

Good to know

Shipping, returns and warranty

🚚 Shipping

Shipped via Australia Post or courier, whichever provides the best service for your location. Ships from our warehouse in Bairnsdale, Victoria.

↩️ Returns

Returns are available for products that have a manufacturing defect.

🛡️ Warranty

Full manufacturer warranty on Phrozen-branded hardware, software, and firmware. Consumable parts are not covered.

Full warranty policy →

📘 User guide

Digital manual coming soon. In the meantime, our team can walk you through setup and operation.

Ask us a question →

Why buy from 3D Cast

Australia's home for Phrozen 3D printing

760 customers have ordered through 3D Cast. Orders ship to every state and territory from our warehouse in Bairnsdale, Victoria.

760+

Customers served across Australia

5★

Average rating across verified reviews

Official brand distributorships: Phrozen, Monocure3D, Resione

Every state and territory. Same-week dispatch from Victoria

Rather than just send it, they contacted me and asked if the order was right. I was able to correct it. Great customer service.

Geoff — Adelaide, SA

Verified customer review

My order was processed promptly. I have found a great supplier here in 3D Cast and they will have my future business.

Martin — Google Review

Google Business review

Finally an Aussie Phrozen supplier. Shipped fast, arrived in good condition.

Sean — Melbourne, VIC

Verified customer review

Official Phrozen distributor

Full manufacturer warranty, genuine Phrozen hardware, and direct brand access. Not a grey market import.

Stocked in Australia

No international shipping wait and no customs complications. Ships from our warehouse in Bairnsdale, Victoria.

Support from people who use it

We run large format Phrozen hardware ourselves. When you have a curing workflow question, you are speaking to someone who knows the machine.

Dave — Google Review

"Great service, great range of product. Support is exceptional. Highly recommended."

Optional extras

Accessories and cleaning chemistry

Stocked in Australia alongside the Mega Cure S. Order at the same time or any time you need a top-up.

Wash Mega S (standalone)

The matching wash station if you are starting with cure only and want to add washing later. 25 litre dual-speed double vortex, side drain valve.

Monocure3D Resinaway resin cleaning solution, original scent

Monocure3D Resinaway, Original Scent

Non-flammable, low-odour resin cleaning concentrate with a longer working life than IPA before replacement.

Monocure3D Resinaway resin cleaning solution, icy mint scent

Monocure3D Resinaway, Icy Mint

The same non-flammable cleaning formula in an icy mint scent for indoor workshop use.

All accessories ship from Australian stock with the same dispatch speed as the Mega Cure S itself.

In Stock Now

Ready for large format curing done right?

All three Mega Cure S configurations are in stock and shipping from Bairnsdale, Victoria. Choose your setup and order direct from Australia's official Phrozen distributor.

Limited stock available — order today.

· Ships from Australia

· Official Phrozen warranty

· Three setup options

Shop the Mega Cure S

FAQ

Phrozen Mega Cure S: Frequently asked questions

Which printers is the Mega Cure S suited for?

The Mega Cure S is suited for large format Phrozen printers including the Sonic Mega 8K S, Sonic Mega 8K V2, and the Sonic Mighty Revo 16K MAX. Its maximum curing size of Ø35 x 30 cm accommodates the build volumes of these printers. For standard desktop printer users, the Phrozen Wash and Cure Kit is the more appropriate option.

Why is 360° rotation important for curing?

Resin cured under a single-direction UV source produces parts with inconsistent mechanical properties. Fully cured surfaces face the light while partially cured surfaces face away, leaving under-cured regions that remain tacky or structurally weaker. The 360° rotating turntable ensures all surfaces receive equal UV exposure across the full cure cycle.

Why does the Mega Cure S have a drying mode?

Residual cleaning solvent on the model surface during UV exposure can inhibit full surface cure and leave a tacky layer. The dual 1,700 RPM fans remove solvent before UV starts in the dry then cure sequential mode. This is the recommended workflow for prints going directly from the Wash Mega S to the Mega Cure S.

What is the recommended cure time?

The timer range is 1 to 120 minutes with a recommended maximum of 30 minutes per cycle. Optimal cure time depends on the resin type, model geometry, and wall thickness. Over-curing causes brittleness in many resin formulations. Our team can advise on cure parameters for specific resins.

Can the Mega Cure S handle batches of smaller parts?

Yes. The detachable internal rack accommodates both large single models and batches of smaller parts across the same curing cycle. The rack allows vertical placement of parts to maximise the Ø35 x 30 cm chamber capacity, making it practical for production runs of multiple parts in a single cure cycle.

What types of resin is the Mega Cure S compatible with?

The Mega Cure S uses 405 nm UV LEDs, which is the standard curing wavelength for the majority of photopolymer resins including Phrozen, Monocure3D, and Resione resins, as well as most engineering, castable, and dental resins. If you are using a specialist resin with a different curing wavelength, check the manufacturer specifications before use.

What is the difference between the Mega Cure S and the Phrozen Wash and Cure Kit?

The Wash and Cure Kit is a compact combined unit suited for standard desktop resin printer build volumes up to Ø25 x 23.5 cm. The Mega Cure S is a standalone large format curing station with a Ø35 x 30 cm chamber and dual 1,700 RPM fans, designed for Mega series printer output. They serve different printer size categories and are not interchangeable.

Is the Mega Cure S stocked in Australia?

Yes. The Phrozen Mega Cure S is stocked in Australia by 3D Cast, the official Australian Phrozen distributor. Ships from our Bairnsdale, Victoria warehouse via courier due to its size and weight of 15 kg.