Phrozen Wash Mega S — In Stock | 3D Cast

Resin Wash Station · 25L Capacity

Phrozen Wash Mega S: Large Format Wash, In Stock Now

Name: Phrozen Wash Mega S
Brand: Phrozen
Price: 600.00 AUD
Availability: InStock
Rating: 5 (19 reviews)

A large format resin wash station with a 25 litre tank and dual-speed double vortex, built for build plates up to 15 inches including the full Mega 8K series. Automatic direction reversal every minute and a side drain valve make batch cleaning safe and thorough at production scale. In stock now with official Phrozen warranty, shipped from Bairnsdale, Victoria.

Phrozen Wash Mega S large format IPA wash station for MSLA resin 3D printing

25 litre dual-speed double vortex tank

Wash Only

Phrozen Wash Mega S

$600 AUD inc. GST

25 litre dual-speed double vortex tank
Built-in side drain valve
Adjustable timer and dual speed settings
Supports build plates up to 15 inches

In stock now

Official Phrozen warranty · Ships from Victoria

See all 3 configurations →

25L

Tank Capacity

15"

Max Build Plate

300rpm

Vortex Speed

760+

AU Customers Served

Gallery

See it up close

Phrozen Wash Mega S resin wash station with 24 litre capacity gauge on light grey workshop shelf

Phrozen Wash Mega S shown as part of a large format post-processing bundle

Phrozen Wash Mega S in use as part of the Mega S Wash and Cure bundle

Phrozen Wash Mega S shown as part of a Sonic Mega 8K S printer bundle

Scroll for more views

Why the Wash Mega S

1

A 25 litre tank built for 15 inch build plates
The tank accommodates build plates up to 15 inches, covering the Mega 8K series plus 13.6, 13.3, and 12.8 inch format plates. The full range of current large format Phrozen printer build platforms fits without modification.
2

Double vortex that reverses direction every minute
A dual-speed vortex runs at 300 rpm on high and 275 rpm on low, with automatic direction reversal that continuously agitates the cleaning solution from multiple directions, reaching stagnant zones a single-direction vortex misses.
3

A side drain valve, because pouring 25 litres by hand is a bad idea
A built-in side drain valve allows safe, controlled disposal of used cleaning solution without tilting or lifting the tank, removing the spill risk that comes with manually pouring a full 25 litre tank.

Who it is for

Built for large format printers, not desktop leftovers

Standard compact wash stations hold 3 to 8 litres and cannot physically fit a 15 inch build plate. The Wash Mega S exists for exactly the setups where that becomes a problem.

🖨️

Mega series owners

Purpose built for build plates up to 15 inches, covering the full Mega 8K range

🏭

Production studios

Batch clean multiple large format prints in a single 25 litre cycle

🦷

Dental labs

High volume model washing at production scale

⚙️

Engineers

Tune wash parameters for engineering grade and high viscosity resins

🎭

Cosplay and prop makers

Clean full scale armour panels and props too large for compact stations

🚂

Model makers

Batch wash multiple large scale parts without switching solutions mid job

Key features

What makes the Wash Mega S different

Built for large format printers and production volumes. The compact wash stations used for desktop printers cannot accommodate Mega series build plates.

Capacity

25 litre tank, 15 inch plates

Accommodates build plates up to 15 inches, covering the Mega 8K series as well as 13.6, 13.3, and 12.8 inch format plates.

Cleaning

Dual-speed double vortex

300 rpm on high, 275 rpm on low, with direction reversal every minute for even resin removal from deep recesses and undercut surfaces.

Safety

Built-in side drain valve

Safe, controlled disposal of used cleaning solution without tilting or pouring from a full 25 litre tank.

Control

Adjustable timer and dual speed

Tune the wash cycle for different resin types and model geometries, including engineering resins and high-viscosity materials.

See it in action

See the Wash Mega S in action

25 litre dual vortex wash with auto-direction reversal and side drain valve.

Specifications

Technical overview

Full specifications confirmed by Phrozen Technology. The Wash Mega S is stocked by 3D Cast, Australia's official Phrozen distributor.

Specification	Detail
Tank capacity	25 litres Large Format
Cleaning method	Dual-speed double vortex with auto-direction reversal
Vortex speed	High 300 rpm, Low 275 rpm
Direction reversal	Automatic, every minute
Supported build plates	15 inch (Mega series), 13.6, 13.3, 12.8 inch
Timer	10 minute intervals, adjustable
Drain	Built-in side drain valve
Input voltage	AC 100–240V, 50/60 Hz
Product dimensions	41.2 x 26.0 x 62.5 cm
Inner capacity	33.0 x 19.0 x 30.0 cm
Weight	7.5 kg

Choose your setup

Three ways to get started

All options ship from Australian stock with full Phrozen warranty.

Wash Only

$600 AUD inc. GST

The wash station on its own

Phrozen Wash Mega S wash station
25 litre dual-speed double vortex tank
Built-in side drain valve
Adjustable timer and dual speed settings

PHWMS01

Meet Luke, founder of 3D Cast

I've been 3D printing since 2016. In 2024 I launched 3D Cast's online store as Phrozen Technology's official Australian distributor, with the goal of giving Australian hobbyists, makers, and professionals fast access to the best 3D printing hardware available, backed by real technical support from people who use the machines themselves. Got a question? You're talking straight to me, not a call centre.

Luke Macwhirter — Founder, 3D Cast

Good to know

Shipping, returns and warranty

🚚 Shipping

Shipped via Australia Post or courier, whichever provides the best service for your location. Ships from our warehouse in Bairnsdale, Victoria.

↩️ Returns

Returns are available for products that have a manufacturing defect.

🛡️ Warranty

Full manufacturer warranty on Phrozen-branded hardware, software, and firmware. Consumable parts are not covered.

Full warranty policy →

📘 User guide

Digital manual coming soon. In the meantime, our team can walk you through setup and operation.

Ask us a question →

Why buy from 3D Cast

Australia's home for Phrozen 3D printing

760 customers have ordered through 3D Cast. Orders ship to every state and territory from our warehouse in Bairnsdale, Victoria.

760+

Customers served across Australia

5★

Average rating across verified reviews

Official brand distributorships: Phrozen, Monocure3D, Resione

Every state and territory. Same-week dispatch from Victoria

Rather than just send it, they contacted me and asked if the order was right. I was able to correct it. Great customer service.

Geoff — Adelaide, SA

Verified customer review

My order was processed promptly. I have found a great supplier here in 3D Cast and they will have my future business.

Martin — Google Review

Google Business review

Finally an Aussie Phrozen supplier. Shipped fast, arrived in good condition.

Sean — Melbourne, VIC

Verified customer review

Official Phrozen distributor

Full manufacturer warranty, genuine Phrozen hardware, and direct brand access. Not a grey market import.

Stocked in Australia

No international shipping wait and no customs complications. Ships from our warehouse in Bairnsdale, Victoria.

Support from people who use it

We run large format Phrozen hardware ourselves. When you have a workflow question, you are speaking to someone who knows the machine.

Dave — Google Review

"Great service, great range of product. Support is exceptional. Highly recommended."

Optional extras

Accessories and cleaning chemistry

Stocked in Australia alongside the Wash Mega S. Order at the same time or any time you need a top-up.

Mega Cure S (standalone)

The matching curing station if you are starting with wash only and want to add curing later. 360° rotating turntable, dual high-speed drying fans.

Monocure3D Resinaway resin cleaning solution, original scent

Monocure3D Resinaway, Original Scent

Non-flammable, low-odour resin cleaning concentrate with a longer working life than IPA before replacement.

Monocure3D Resinaway resin cleaning solution, icy mint scent

Monocure3D Resinaway, Icy Mint

The same non-flammable cleaning formula in an icy mint scent for indoor workshop use.

All accessories ship from Australian stock with the same dispatch speed as the Wash Mega S itself.

In Stock Now

Ready for large format wash at scale?

All three Wash Mega S configurations are in stock and shipping from Bairnsdale, Victoria. Choose your setup and order direct from Australia's official Phrozen distributor.

Limited stock available — order today.

· Ships from Australia

· Official Phrozen warranty

· Three setup options

Shop the Wash Mega S

FAQ

Phrozen Wash Mega S: Frequently asked questions

Which Phrozen printers is the Wash Mega S compatible with?

The Wash Mega S accommodates build plates up to 15 inches, covering the full Phrozen Mega 8K series and all other Phrozen large format printers with 13.6-inch, 13.3-inch, and 12.8-inch build platforms. It is paired with the Mega Cure S for a complete large format post-processing workflow.

Why does the vortex reverse direction every minute?

A single-direction vortex creates stagnant zones in deep recesses, internal cavities, and under overhanging surfaces. Automatic direction reversal alternates the vortex rotation every minute, continuously agitating the cleaning solution from multiple directions. This achieves more even resin removal from complex geometry including internal channels, dental model detail, and lattice structures.

What cleaning solutions are compatible with the Wash Mega S?

The Wash Mega S is compatible with IPA (isopropyl alcohol) and purpose-made resin cleaning solutions including Monocure3D Resinaway. Resinaway has a longer working life than IPA before replacement and lower flammability. We stock Monocure3D Resinaway at 3D Cast.

Why does the Wash Mega S have a drain valve?

At 25 litres of IPA or Resinaway, manually tilting and pouring from the tank presents a significant spill risk. The built-in side drain valve allows safe, controlled disposal of used cleaning solution without lifting or tilting the tank. This is a practical safety and workflow consideration for high-volume post-processing setups.

How do I know when to replace my cleaning solution?

Cleaning solution becomes saturated with dissolved uncured resin over time and loses effectiveness. Signs of exhaustion include a dark or heavily discoloured solution, a tacky or cloudy finish on washed parts, and a strong resin smell that persists after washing. Resinaway typically lasts longer than IPA before needing replacement. Expose used solution to sunlight to cure suspended resin before disposal.

Can the Wash Mega S be used with engineering or dental resins?

Yes. The dual-speed vortex and adjustable timer allow the wash parameters to be tuned for different resin types. Engineering-grade and dental resins often require longer wash times and may benefit from the high-speed vortex setting to remove viscous uncured material from fine features and internal surfaces.

What is the difference between the Wash Mega S and a standard compact wash station?

Standard compact wash stations typically hold 3 to 8 litres and cannot physically accommodate build plates from 15-inch large format printers. The Wash Mega S holds 25 litres, supports build plates up to 15 inches, and uses a dual-speed double vortex with auto-direction reversal. It is designed specifically for large format printer output where compact stations are too small.

Is the Wash Mega S stocked in Australia?

Yes. The Phrozen Wash Mega S is stocked in Australia by 3D Cast, the official Australian Phrozen distributor. Ships from our Bairnsdale, Victoria warehouse via courier due to its size and weight.