Phrozen High Speed PLA 1kg Black

Orders are shipped via Australia Post with Standard and Express shipping available at checkout.

Density:1.2—1.25g/cm2
Tensile Strength (MPa):55+/-10%
Tensile Modulus (MPa):1200 +/-10%
Elongation at Break (%):10.2 +/-10%
Bending Strength (MPa):70 +/-10%
Bending Modulus (MPa):1606 +/-10%
Impact Strength (J/m):;50+/-10%
Shrinkage Rate:;0.5%
Heat Deflection Temperature (@0.45MPa):50°C
MFI (Melt Flow Index):10.68g/10min
Nozzle Temperature:190-220°C
Bed Temperature (PEI Plate):45~60°C
Printing Speed:Up to 600 mm/s

Please operate at room temperature in a cool, well-ventilated area.
The material is hygroscopic; when not in use, please seal well and store in a dry environment to prevent moisture absorption.
When the material has been opened for a long time, it is recommended to bake it before printing.
If warping occurs during printing, please increase the heated bed temperature as recommended.
The nozzle is prone to clogging. Evaluate cleaning or filament replacement if extrusion is not smooth.
For personal safety, it's recommended to wear a mask during printing operations to prevent the inhalation of airborne particles that may be generated during the process.
Please dispose of waste according to recycling procedures for "general resource materials" in your local area.
The shelf life is one year; once opened, please use it up as soon as possible.

Free returns and refunds on products that have a defect. Returns and refunds (excluding shipping cost) are available on unopen packets. Customer to pay return cost if due to change of mind.