Phrozen Dental · Introductory Offer
Bring dental 3D printing in-house.
Full-payment offer closes 15 June 2026
See the Offer →
Sonic CS+
Sonic LS+
XL 4K Plus
Cure+
Wash+
Dental 3D Printers
Precision resin printing for Australian dental clinics and laboratories
Phrozen Dental CS+ Resin 3D Printer
Chairside
Same-day printing for in-clinic workflows. Deliver appliances to patients in 45 minutes.
$6,900.00Unit price /UnavailableGST Included-
Phrozen Dental LS+ Resin 3D Printer
Labside
High-volume batch production. Print 20 full-arch models or 35 splints per session.
$8,900.00Unit price /UnavailableGST Included-
Phrozen Dental XL 4K Plus Resin 3D Printer
Labside
The proven lab entry point. Batch print up to 8 full-arch models in 35 minutes.
$5,900.00Unit price /UnavailableGST Included-
Phrozen Dental 3D Printers for Australian Clinics & Labs
Precision, Speed, and Scalability — Built for Professional Dental Workflows
3D Cast is the official Australian distributor for Phrozen Dental, stocking the full range of chairside and labside 3D printers, with same-day dispatch and local support from people who actually use this equipment.
Whether you're a single-chair clinic looking to deliver same-day restorations, or a high-volume dental lab printing arches in batch, the Phrozen Dental range has a printer built for your workflow.
The range is ideal for full-arch dental models, diagnostic study models, orthodontic and prosthodontic model work, occlusal splint and thermoforming mould fabrication, surgical guides, implant planning models, and same-day chairside restorations.
|
Sonic CS+ Chairside |
Sonic LS+ Labside |
Sonic XL 4K Plus Labside |
|
|---|---|---|---|
| XY Resolution | 22 µm | 34 µm | 52 µm |
| Build Volume | 168 × 74 × 175 mm | 198 × 125 × 175 mm | 196.6 × 120.3 × 200 mm |
| Light Source | 385nm LCD | 385nm LCD | 405nm LCD |
| Layer Thickness | 50–100 µm | 50–100 µm | 30–100 µm |
| Print Speed | Up to 100 mm/hr | Up to 100 mm/hr | Up to 90 mm/hr |
| Best For | Same-day chairside workflows | High-volume lab batch production | Entry-level lab printing |
| Recommended For | Single-chair clinics and small practices | High-volume labs and multi-chair practices | Labs entering digital workflows |
| Software | Phrozen DS Slicer | Phrozen DS Slicer | Phrozen DS Slicer |
| Connectivity | USB, Wi-Fi, Ethernet | USB, Wi-Fi, Ethernet | USB, Wi-Fi, Ethernet |
| Display | 7" touchscreen | 7" touchscreen | 5" touch panel |
| Machine Size | 36 × 38 × 55 cm | 36 × 38 × 55 cm | 33 × 29 × 47 cm |
| Build Plate | 2 plates included — Standard (168 × 74 mm) and Mini (75 × 75 mm) | 2 plate sizes — Large (198 × 125 mm) and Standard (168 × 74 mm) | Single plate — 196.6 × 120.3 mm |
Dental 3D printers use resin-based additive manufacturing to produce highly accurate dental appliances directly from digital scans. Unlike traditional lab workflows that rely on stone models and manual fabrication, a dental 3D printer produces consistent, repeatable results in a fraction of the time. Modern dental LCD printers like the Phrozen Sonic CS+, LS+, and XL 4K Plus offer clinical-grade precision at XY resolutions as fine as 22 µm, making them suitable for crowns, surgical guides, splints, aligners, and full-arch models.
Bringing 3D printing in-house gives dental practices and laboratories direct control over quality, turnaround time, and cost. Reduced reliance on external labs means faster patient turnaround and lower per-unit production costs, with the ability to reprint and adjust quickly when needed. For high-volume labs, batch printing multiple arches or splints in a single session dramatically improves throughput without compromising accuracy.
The Phrozen Dental range supports a wide variety of clinical and laboratory applications, from orthodontic model printing and thermoforming mould fabrication through to surgical guide production, gingival mask printing, and All-on-X workflows. With validated resin profiles and Phrozen DS Slicer software included, setup is straightforward and results are consistent from the first print.
Frequently Asked Questions
Which printer is right for my dental clinic?
If you're a chairside clinic looking to produce same-day restorations, surgical guides or splints, the Sonic CS+ is designed for you — compact, fast and validated for in-clinic workflows. For higher-volume practices or labs, the Sonic LS+ or XL 4K Plus are better suited for batch production.
Do these printers work with third-party resins?
Yes — all Phrozen Dental printers use an open material system with validated settings for leading dental resin brands. 3D Cast stocks a full range of compatible dental resins.
What software is included?
All three printers come bundled with Phrozen DS Slicer, a dental slicing software that automates support generation and print orientation for common dental appliances.
Do you offer support for setting up the printer?
Yes. 3D Cast provides local Australian support from people who actually use this equipment. We can help with setup, resin profiles and workflow questions via email or live chat.
How long does shipping take?
All Phrozen Dental printers are stocked in Australia. Orders dispatched same day before 2PM AEST, with delivery to most metro areas in 1-3 business days.