Phrozen Air Purifier Max
Phrozen Air Purifier Max is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Returns
Returns
Warranty Information
Warranty Information
Phrozen Air Purifier Max
Phrozen Air Purifier Max: Source Level Exhaust Filtration for FDM and Resin 3D Printing
The Phrozen Air Purifier Max is an exhaust mounted air purification unit for FDM and resin 3D printers. Rather than filtering air after it has already spread into the room, it connects to a printer's exhaust port using the two included vent hoses and pulls dust, smoke and resin odour straight from the print chamber through six stages of filtration before releasing clean air.
It suits home workshops and small studios running higher volume or continuous prints, where fumes and fine dust are a bigger concern than a single small job. On Phrozen printers it connects directly to the Sonic Mighty Revo 16K, Sonic Mighty Revo 14K, Sonic Mega 8K S and Sonic Mega 8K V2. Arco FDM printers fitted with a PentaShield enclosure connect via a printed adapter. Other Phrozen models, including the Sonic Mighty 12K and Sonic Mini 8K S, connect using the separate 3D Printer Enclosure Mega accessory. It complements rather than replaces the Phrozen Air Purifier 2 Piece Set already in the 3D Cast range: the USB unit targets resin odour close to the print, while the Air Purifier Max handles higher volumes of dust, smoke and fumes straight from the chamber.
It is not limited to Phrozen machines. The magnetic exhaust connector also fits a number of other manufacturers' printers directly, including the Elegoo Mars 5 Ultra, Mars 4 Max, Mars 4 DLP, Saturn 4 Series, Saturn 3 Series, Saturn 2, Saturn 8K and Jupiter SE, and the Bambu Lab H2D. Printers with a different exhaust port size can use a 3D printed adapter for a secure fit.
Filtration runs through a top G4 pre filter, a HEPA composite stage (G4 filter x 2, HEPA H12 filter x 2) and an activated carbon stage, rated up to 99.95% purification efficiency. Three fan modes cover different print types: power mode runs at 240m³/h for high emission prints such as ABS, Nylon or laser engraving, balanced mode runs at 100m³/h for everyday printing, and quiet mode runs at 60m³/h and 42dB for overnight jobs. Filters slide out for a tool free swap in around a second, with a built in indicator light for when a filter needs changing.
- Main unit size: 298 x 295 x 440mm
- Main unit weight: 10.5kg
- Max airflow: 240m³/h
- Fan modes: power 240m³/h, balanced 100m³/h, quiet 60m³/h at 42dB
- Filtration: top G4 filter cotton, HEPA composite filter (G4 x 2, HEPA H12 x 2), activated carbon filter
- Purification efficiency: up to 99.95%
- Vent hoses: 2 included, 75mm diameter, 2000mm length each, secured with 3 fixing clips
- Exhaust connector: 70mm magnetic, adapter compatible for 74mm ports
- Filter lifespan: HEPA composite filter approximately 1200 hours, activated carbon filter approximately 800 hours
- Direct connection, Phrozen: Sonic Mighty Revo 16K, Sonic Mighty Revo 14K, Sonic Mega 8K S, Sonic Mega 8K V2
- Adapter or enclosure required, Phrozen: Arco with PentaShield, Sonic Mighty 12K, Sonic Mini 8K S
- Direct connection, other brands: Elegoo Mars 5 Ultra, Mars 4 Max, Mars 4 DLP, Saturn 4 Series, Saturn 3 Series, Saturn 2, Saturn 8K, Jupiter SE, Bambu Lab H2D
3D Cast is Australia's official Phrozen distributor, with direct technical support for exhaust and filtration setup across the Phrozen printer range.
Specifications
Specifications for the Phrozen Air Purifier Max.
Specifications
Specifications for the Phrozen Air Purifier Max.
3D Cast is the official Australian distributor for Phrozen Technology, stocking genuine Phrozen spare parts for the full Phrozen printer range from our Bairnsdale, Victoria warehouse.
Frequently Asked Questions
The Air Purifier Max connects to the exhaust port and handles higher volumes of dust, smoke and fumes directly from the chamber. The USB Air Purifier is a smaller unit placed beside the printer that targets resin odour at the print surface. The two can be used together.
Direct connection is supported on the Sonic Mighty Revo 16K, Sonic Mighty Revo 14K, Sonic Mega 8K S and Sonic Mega 8K V2. Other models such as the Mighty 12K, Mini 8K S, and Arco need an adapter or the 3D Printer Enclosure Mega accessory.
Yes. The magnetic exhaust connector fits several other manufacturers' printers directly, including the Elegoo Mars 5 Ultra, Mars 4 Max, Mars 4 DLP, Saturn 4 Series, Saturn 3 Series, Saturn 2, Saturn 8K, Jupiter SE, and the Bambu Lab H2D.
The HEPA composite filter is rated for approximately 1200 hours and the activated carbon filter for approximately 800 hours. Filters slide out for a tool-free swap in around a second, with a built-in indicator light for when a change is needed.
Quiet mode runs at 60m³/h and 42dB, suited to overnight jobs. Balanced mode runs at 100m³/h for everyday printing, and power mode runs at 240m³/h for high emission prints like ABS, Nylon, or laser engraving.
Yes, on the hardware unit itself, per Phrozen's official warranty policy. Consumable parts like the HEPA composite and activated carbon filters are not covered.
Let customers speak for us
Great for that final clean of your miniatures. I highly recommend
This is probably the best resin I've used for printing Wargaming Napoleonic 28mm miniatures. No broken bayonets or sabers even after a drop test. One word of caution, however. I've discovered it's not wise to leave the minis on the build plate to drain for any more than 2 or 3 hours otherwise you might see some distortion in where a musket barrel comes into contact with the headdress, which is common with Napoleonic 'Marching' poses. A great resin for tabletop miniature that need to be robust.
Excellent service and communication, Luke goes above and beyond to ensure customer satisfaction. Thank you
Thanks for the efficient delivery of my order. Haven't actually used the resin yet due to unfavourable outdoor temperature. My printing shed is not insulated.
Cannot ask for better. Easy to checkout and arrived in double quick time.
Product is great. No fumes and cleans the resin off without any problems. Highly recommended!
This stuff is top notch, you are getting what you pay for. I am new to 3d printing, my friend has been doing it for tears and he is very impressed
Cannot praise the service enough. The order was dispatched the same day as ordered and promptly received. All queries since the order have been responded to in a very timely manner.
Have printed four lots of dental arches with this resin and have had successful prints each time with no problems. Cheaper than the previous high temp resin I was using and more successful print quality so far. Would buy again.
Works perfectly as advertised. Easy to install, even with fat fingers. Good price, excellent service as always from the team at 3Dcast. Thank you.
Easy to communicate with and order fulfillment was prompt. I’ll be back!!
Ready to order?
3D Cast is Australia's official Phrozen distributor. Genuine parts, Australian stock, local support.
Back to top — Add to Cart