Resione F69 Black Flexible 3D Printer Resin
Resione F69 Black Flexible 3D Printer Resin is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Product Care
Product Care
Returns
Returns
Resione F69 Black Flexible 3D Printer Resin
Payment methods
Description
Description
Resione F69 Black Flexible 3D Printer Resin: High Elongation Rubber-Like MSLA Resin
Resione F69 Black is a flexible MSLA photopolymer resin formulated for engineers, product designers, and hobbyists who need printed parts with genuine rubber-like elongation and tear resistance. It is suited to seals, gaskets, flexible connectors, figure accessories, tyre models, shoe samples, buffers, and dampening elements where the material must flex, compress, and return repeatedly without tearing or fatigue failure.
F69's defining specification is its elongation at break of 255%. At this figure, a part can stretch to more than three and a half times its resting length before failing, which is in the range of natural rubber and TPU compounds rather than standard photopolymers. This elongation is what enables F69 parts to be folded, stretched, and compressed thousands of times without cracking. Tear strength of 47.2 kN/m is the second critical figure: high elongation without tear resistance produces a resin that stretches well but fails suddenly at stress concentrations like sharp corners, thin walls, and fastener holes. F69 is specifically formulated to combine both properties, which is what determines whether a flexible gasket or seal survives assembly and service. Shore A hardness of 60 to 75 places F69 in the medium-soft rubber range, comparable to a car tyre sidewall, firm enough to hold printed geometry and surface detail under light load, soft enough to flex and return at room temperature.
Tensile strength of 7.9 MPa and elastic modulus of 2.0 MPa reflect the low-stiffness mechanical profile of a true flexible resin. F69 is not an ABS-like or semi-rigid material: it is a rubber substitute, and these figures reflect that correctly. One important characteristic: F69 hardens significantly below 20°C. At approximately 5°C the resin transitions to a hard, impact-resistant state. Parts intended for flexible use should be deployed in environments above 20°C. Below that threshold, the flexible properties diminish progressively. F69 can be blended with Resione rigid resins including K, M58, M68, and G217 to tune hardness upward for applications requiring a stiffer durometer. Compatible with all MSLA and DLP resin printers. Post-cure with 385 to 405nm UV for 20 to 40 minutes. Recommended layer height 0.09mm for flexible parts.
- Resin type: Flexible rubber-like MSLA photopolymer
- Colour: Black
- Shore A hardness: 60 to 75
- Tensile strength: 7.9 MPa
- Tear strength: 47.2 kN/m
- Elongation at break: 255%
- Elastic modulus: 2.0 MPa
- Viscosity at 25°C: 1250 mPas
- Cure wavelength: 385 to 405nm
- Post-cure: 20 to 40 minutes
- Recommended layer height: 0.09mm
- Volume: 1 kg
- Blendable with: Resione K, M58, M68, G217
- Compatible printers: All MSLA and DLP resin printers
- RoHS and REACH compliant: Yes
3D Cast is Australia's official Resione distributor, stocking genuine F69 Black resin with fast shipping Australia wide and direct technical support.
Let customers speak for us
service and delivery is very quick and efficient.
My husband was so happy with it thank you again.
And youare so helpful with any questions
I’ve tested plenty of resins in the past, but Resione Tough74 v2 is on a completely different level. The material properties are incredible - it’s the perfect balance of rigidity and toughness. I’m using it for articulated garage resin kits, and the results are flawless. If you are tired of brittle prints and want something that actually feels like a manufactured product, this is it!
I have used the Phrozen 8K resin before, so I know how good a product it is. Delivery was fast. Sadly, whoever delivered it left it in the foyer of my apartment building without even buzzing me. Nothing to do with 3D cast but I hate to think what would have happened if a kid had got their hands on it.
Simple replacement part. Easy install. Comes with replacement tape included. Good product.
Love this resin for printing our range of table-top gaming miniatures. It's now become our standard. Makes support removal a dream. They just melt off.
Fast friendly service. Great product. Received welcome emails, confirmations and promo coupons.
I switched to this because isopropyl was stinking up the house from the garage. This has a nice lemon smell, cleans well, doesn't make my eyes burn from the fumes and didn't get cloudy after the first use. It did kick up the VOC readings the same as isopropyl, but didn't linger the entire day when I used my air purifier. Great stuff, will buy more.
I asked a question regarding dental resins, and Luke answered spontaneously - great service!
My order was processed promptly and dispatched to arrive shortly after, well packaged. The couple of questions I had were answered in good time by Luke. I have found a great supplier here in 3D Cast and they will have my future business.
Great business to deal with. Recently after a full days work, I placed an order. 3D Cast was on the ball, as the resin I ordered was different to my previous orders, as it turned out I pushed the wrong button, this was my bugger up. But, rather than just send it, they contacted me and asked if this was right and I was able to correct it.
Great customer service, if they had not done this, I would of had resin I would not use.
For years getting Phrozens Aqua 8K resin into Australia has been frustrating, often requiring ordering from Amazon US, Luke @3D Cast has solved that for us, I’m able to order my staple resin and have it usually the next day, great pricing too, and fantastic customer service! Thanks Luke…
Jason
Scale3DProductions
Melbourne, Victoria
These guys are awesome. Quick and conscientious if there are any issues. Myself and another 3D printing nerd who has had similar bad experiences with other vendors are super impressed. Highly recommended.
