Monocure3D IncredaFILL® Essentials Kit 70g
Monocure3D IncredaFILL® Essentials Kit 70g is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Product Care and Storage
Product Care and Storage
Returns
Returns
Warranty Information
Warranty Information
Monocure3D IncredaFILL® Essentials Kit 70g
Monocure3D IncredaFILL Essentials Kit 70g: UV-Curable Filler Starter Kit
Monocure3D IncredaFILL Essentials Kit 70g contains a 70g pot of Incredafill urethane polymer filler and a mini 395 nm LED UV torch, providing the essential equipment to begin UV-curable filler work without purchasing a full torch kit separately. It is the entry-level Incredafill kit for users who want to try UV-curable filler before committing to the 350g Ultimate Starter Kit volume, or who need a compact kit for occasional use rather than regular production work.
Incredafill cures in 5 seconds under the included 395 nm UV torch, non-shrinking and non-cracking, to a hard surface that sands and accepts primer, paint, and varnish. The 100% solid formulation does not shrink during cure, which is the critical property for filling surface defects on resin prints where shrinkage would leave a visible depression after sanding. It adheres to resin, plastics, glass, and metal.
The mini UV torch included in the Essentials Kit requires 2 x AAA batteries (not included). Users who expect to work with Incredafill regularly or at higher volume should consider the Ultimate Starter Kit, which includes a rechargeable torch and a 350g tub at a more economical per-gram cost.
3D Cast is Australia's official Monocure3D distributor, stocking genuine IncredaFILL with fast shipping Australia wide.
Why the Mini 8KS
-
015-Second Cure
Incredafill cures hard in 5 seconds under direct UV torch, compared to hours for traditional putty fillers or multiple cure cycles for UV resin gap filling approaches.
-
02Non-Shrinking
Standard gap fillers and putties shrink as they cure or dry, requiring multiple applications. Incredafill does not shrink, so a single application fills and stays filled.
-
03Kit Includes Everything
The kit includes filler and UV torch in one purchase. No separate UV light source needed. Open the box and start finishing prints on the first session.
-
045 sec
cure time
Kit Contents and Specifications
Full contents and specifications for the Monocure3D IncredaFILL kit.
Kit Contents and Specifications
Full contents and specifications for the Monocure3D IncredaFILL kit.
3D Cast is the official Australian distributor for Monocure3D, stocking the full IncredaFILL range and Monocure3D accessories from our Bairnsdale, Victoria warehouse. All products are genuine Monocure3D inventory. Technical support is available directly from our team.
Complete your post-processing setup
Frequently Asked Questions
Incredafill is a UV-curable urethane filler for sealing surface defects on 3D printed parts including support scars, pinholes, layer lines, and small voids. Applied to the defect and cured under UV light, it produces a hard, sandable surface that can be primed and painted without the defect showing through.
Both kits include Incredafill filler and a UV torch. The Essentials Kit contains 70g of filler and a compact mini UV torch, suited to occasional use and smaller finishing jobs. The Ultimate Starter Kit contains 350g of filler, a full-size UV torch, rechargeable battery, charger, safety glasses, and applicators: a complete setup for regular finishing workflows.
Apply a small amount of filler to the defect using the applicator or a sculpting tool, smooth to the surrounding surface level, then cure immediately under the UV torch for 5 seconds. Sand flush once cured. For deeper defects, apply and cure in layers rather than a single thick application.
No. Incredafill is formulated to be non-shrinking. The cured filler remains at the level it was applied without sinkage or deformation, which means a single application typically fills the defect flush without requiring a second coat.
Yes. Incredafill is compatible with both resin and FDM printed parts. It bonds to most plastics and is particularly effective at filling layer lines and surface defects on FDM prints before priming and painting.
Yes. Once cured, Incredafill sands cleanly to the surrounding surface level and accepts primer and paint in the same way as the printed part. There is no soft or tacky residue after full UV cure.
If you already have a UV torch from a previous Incredafill kit or another UV source, a refill tub is more economical than buying another kit. The refill tubs are available in 70g HD and 350g standard formulations.
Yes. The full Monocure3D IncredaFILL range is stocked by 3D Cast, the official Australian distributor for Monocure3D, and ships from our Bairnsdale, Victoria warehouse via Australia Post.
Let customers speak for us
Cannot praise the service enough. The order was dispatched the same day as ordered and promptly received. All queries since the order have been responded to in a very timely manner.
Have printed four lots of dental arches with this resin and have had successful prints each time with no problems. Cheaper than the previous high temp resin I was using and more successful print quality so far. Would buy again.
Works perfectly as advertised. Easy to install, even with fat fingers. Good price, excellent service as always from the team at 3Dcast. Thank you.
Easy to communicate with and order fulfillment was prompt. I’ll be back!!
Really user friendly - easy to work with (even in very small quantities and very tight spots). Cures almost instantaneously under the supplied UV torch and then easy to sand back, scribe etc. A must have product for scale modeling!
Delivered super fast, product works as described. Very happy
Delivered super fast, product works as described. Very happy
service and delivery is very quick and efficient.
My husband was so happy with it thank you again.
And youare so helpful with any questions
I’ve tested plenty of resins in the past, but Resione Tough74 v2 is on a completely different level. The material properties are incredible - it’s the perfect balance of rigidity and toughness. I’m using it for articulated garage resin kits, and the results are flawless. If you are tired of brittle prints and want something that actually feels like a manufactured product, this is it!
I have used the Phrozen 8K resin before, so I know how good a product it is. Delivery was fast. Sadly, whoever delivered it left it in the foyer of my apartment building without even buzzing me. Nothing to do with 3D cast but I hate to think what would have happened if a kid had got their hands on it.
Simple replacement part. Easy install. Comes with replacement tape included. Good product.
Ready to order?
3D Cast is Australia's official Monocure3D distributor. In stock, fast dispatch, local support.
Back to top — Add to Cart