Monocure3d XL nFEP Film
Monocure3d XL nFEP Film is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Product Care and Storage
Product Care and Storage
Returns
Returns
Warranty Information
Warranty Information
Monocure3d XL nFEP Film
Monocure3D XL nFEP Film: Premium Vat Film for Large Format Resin Printers
Monocure3D XL nFEP Film is a single-sheet premium replacement vat film measuring 210 x 297 mm and 127 µm thick, manufactured from genuine PFA (nFEP) polymer. It is suited to any resin printer with a large format vat that accepts a 210 x 297 mm sheet, including printers with 8.9-inch screens. Check your printer's vat dimensions before ordering to confirm fit.
nFEP (PFA) delivers lower suction force during layer separation than standard FEP film, which reduces print failures on the large cross section prints that larger format printers are typically used for. The smoother surface of nFEP reduces the mechanical bond between the cured resin layer and the film during lift, lowering peel force at each layer cycle. At 127 µm, this is thinner than standard 150 µm or 200 µm FEP options, which provides greater film flexibility, further reducing peel force and improving UV transmittance compared to thicker films.
Correct installation tension is confirmed by a drum-like resonance when the installed film is tapped at the centre, indicating the film is seated flat without low-tension areas that cause uneven cure contact.
- Material: nFEP (PFA — Perfluoroalkoxy)
- Size: 210 x 297 mm
- Thickness: 127 µm
- Quantity: 1 sheet
- Suits: Any resin printer with a vat accepting 210 x 297 mm film (including 8.9-inch format printers)
3D Cast is Australia's official Monocure3D distributor, stocking genuine Monocure3D XL nFEP Film with fast shipping Australia wide.
Specifications
Specifications for the Monocure3D XL nFEP Film.
Specifications
Specifications for the Monocure3D XL nFEP Film.
3D Cast is the official Australian distributor for Monocure3D, stocking the full Monocure3D vat film range from our Bairnsdale, Victoria warehouse.
Frequently Asked Questions
nFEP offers lower peel force during layer separation and a longer service life than standard FEP, reducing print failures on larger or more complex geometries at the cost of a higher price per sheet.
No. This is a direct upgrade path for existing XL format vats accepting 210 x 297mm film, with no hardware changes required.
Check your printer's vat dimensions before ordering. This film suits any resin printer with a vat accepting 210 x 297mm film, including printers with 8.9-inch screens.
Correctly tensioned film produces a drum-like resonance when tapped lightly at the centre.
Yes. 3D Cast is Monocure3D's official Australian distributor, stocking the full film range.
Yes. Monocure3D is an Australian-developed 3D printing materials brand, stocked locally by 3D Cast.
Let customers speak for us
This stuff is top notch, you are getting what you pay for. I am new to 3d printing, my friend has been doing it for tears and he is very impressed
Cannot praise the service enough. The order was dispatched the same day as ordered and promptly received. All queries since the order have been responded to in a very timely manner.
Have printed four lots of dental arches with this resin and have had successful prints each time with no problems. Cheaper than the previous high temp resin I was using and more successful print quality so far. Would buy again.
Works perfectly as advertised. Easy to install, even with fat fingers. Good price, excellent service as always from the team at 3Dcast. Thank you.
Easy to communicate with and order fulfillment was prompt. I’ll be back!!
Really user friendly - easy to work with (even in very small quantities and very tight spots). Cures almost instantaneously under the supplied UV torch and then easy to sand back, scribe etc. A must have product for scale modeling!
Delivered super fast, product works as described. Very happy
Delivered super fast, product works as described. Very happy
service and delivery is very quick and efficient.
My husband was so happy with it thank you again.
And youare so helpful with any questions
Ready to order?
3D Cast is Australia's official Monocure3D distributor. Genuine parts, Australian stock, local support.
Back to top — Add to Cart