Monocure3d Pro+ Matte White 3D Printer Resin
Monocure3d Pro+ Matte White 3D Printer Resin is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Product Care
Product Care
Returns
Returns
Monocure3D Pro+ Matte White 3D Printer Resin
Monocure3D Pro+ Matte White is a premium urethane-based resin formulated for professionals and serious hobbyists who need a bright, non glossy white surface that reveals fine detail clearly and provides an excellent base for painting, surface finishing, and professional presentation.
The matte white finish eliminates the surface gloss that can obscure subtle contours and fine line detail on white-toned prints. For architectural models, product prototypes, and artistic pieces where surface clarity on the raw print is important, the matte surface is a practical advantage over glossy white resins. It provides an ideal painting base, accepting primers and paints evenly without colour contamination from the underlying resin tone.
Urethane-based chemistry delivers better impact resistance and mechanical durability than standard photopolymer resins, producing prints that handle with confidence without the brittleness common in lower cost white resins. Consistent performance across MSLA and DLP printers, low odour, and full compatibility with Monocure’s CustomMix system round out the formulation. Available in 1 kg bottles.
3D Cast is Australia’s official Monocure3D distributor. Monocure3D Pro+ Matte White ships from Australian stock with warranty and technical support.
Ready to order?
Australia's official Monocure3D distributor — genuine product, local stock, expert support.
Add to CartMonocure3D Pro+ Matte White — Specifications
Technical data from official Monocure3D product data
Monocure3D Pro+ Matte White — Specifications
Technical data from official Monocure3D product data
Ideal Applications
Architectural Models
Clean matte white surface shows form and structure clearly.
Product Prototypes
Professional presentation finish, ready for painting.
Mould-Making & Casting
Compatible with platinum-cured silicones with no inhibition.
3D Cast is the official Australian distributor for Monocure3D, an Australian-founded resin brand. That means genuine product, local stock, and support from a team that prints with this resin daily.
Guides & Resources
Helpful guides for getting the best results with this resin.
Not sure which resin is right for you?
Talk to us about your project — we'll help you choose.
Frequently Asked Questions
It's a premium urethane-based resin formulated for professionals and serious hobbyists who need a bright, non-glossy white surface that reveals fine detail clearly and provides an excellent base for painting and professional presentation.
The matte finish eliminates surface gloss that can obscure subtle contours and fine line detail, and it accepts primers and paints evenly without colour contamination from the underlying resin tone.
Yes. Unlike most 3D resins, Pro+ is fully compatible with platinum-cured silicones without causing curing inhibition, making it a trusted choice for mould-making and casting workflows.
Urethane-based chemistry gives Pro+ better impact resistance and mechanical durability than standard photopolymer resins, with a tensile strength of 68 MPa.
It's compatible with all MSLA and DLP printers at 405 nm. A minimum 30 minute post-cure is required to reach full mechanical properties.
Keep it sealed at room temperature in a dark, dry, ventilated space away from direct sunlight. Wear gloves and a mask when handling it, and wash any skin or eye contact with plenty of water.
Unopened bottles can be returned, though you'll cover the return shipping if it's a change of mind. Any defective bottle is covered by a free return and refund.
Yes. 3D Cast is Monocure3D's official Australian distributor, so you're getting genuine Pro+ Matte White, made in Australia, with local warranty and support.
