Monocure3D TENSILE Shark Grey 3D Printer Resin
Monocure3D TENSILE Shark Grey 3D Printer Resin is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Product Care
Product Care
Returns
Returns
Data Sheet
Data Sheet
Monocure3D TENSILE Shark Grey 3D Printer Resin: High Strength Engineering Resin
Monocure3D TENSILE Shark Grey is a urethane-epoxy hybrid engineering MSLA resin formulated for functional prototypes, mechanical components, and end-use parts requiring high tensile strength, low elongation, and a tough surface finish. The urethane-epoxy hybrid chemistry distinguishes TENSILE from standard acrylate photopolymers, delivering a mechanical profile that more closely resembles injection moulded engineering plastics in both strength and surface hardness.
Tensile strength in the TENSILE series is significantly higher than standard MSLA resins, which is the property the name directly describes. High tensile strength means parts resist being pulled apart under load, which is the critical property for brackets, structural connectors, load-bearing clips, and mechanical linkages. The shark grey pigment provides a neutral mid-tone surface that is straightforward to inspect for surface defects and dimensional variation, and the tone sits naturally between the light and dark values that show surface detail under directional lighting.
TENSILE Shark Grey is compatible with the Monocure3D CustomMix system, which allows colour toners and functional additives to be blended into the resin base for specialised applications. It is suitable for use with MSLA and DLP resin printers, and supports layer heights from 30 to 200 µm depending on the printer resolution and application requirements.
- Resin type: Urethane-epoxy hybrid MSLA photopolymer
- Colour: Shark Grey
- Volume: 1 kg
- Recommended layer height: 30–200 µm
- CustomMix compatible: Yes
- Compatible printers: All MSLA and DLP resin printers
3D Cast is Australia's official Monocure3D distributor, stocking genuine TENSILE Shark Grey resin with fast shipping Australia wide and direct product support.
Ready to order?
Australia's official Monocure3D distributor — genuine product, local stock, expert support.
Add to CartMonocure3D TENSILE Shark Grey — Specifications
Technical data from official Monocure3D product data. Mechanical properties are print orientation dependent, as is standard for layer-based MSLA resins; both tested values are shown where available
Monocure3D TENSILE Shark Grey — Specifications
Technical data from official Monocure3D product data. Mechanical properties are print orientation dependent, as is standard for layer-based MSLA resins; both tested values are shown where available
Ideal Applications
Structural Brackets & Connectors
High tensile strength resists pulling and stretching forces under load.
Jigs & Fixtures Under Clamping Force
Hard Shore D surface holds geometry through repeated clamping cycles.
Mechanical Linkages
Injection-mould-like mechanical profile for parts under tension in assemblies.
3D Cast is the official Australian distributor for Monocure3D, an Australian-founded 3D printing materials brand. That means genuine product, local stock, and support from a team that prints with this resin daily.
Guides & Resources
Helpful guides for getting the best results with this resin.
Not sure which resin is right for you?
Talk to us about your project — we'll help you choose.
Frequently Asked Questions
It's a urethane-epoxy hybrid engineering MSLA resin for functional prototypes, mechanical components, and end-use parts requiring high tensile strength, low elongation, and a tough surface finish, such as brackets, structural connectors, and load-bearing clips.
TENSILE uses a urethane-epoxy hybrid chemistry rather than a standard acrylate photopolymer, giving it a mechanical profile that more closely resembles injection moulded engineering plastics in both strength and surface hardness.
Yes. Like all layer-based MSLA resins, mechanical properties are print orientation dependent. Monocure3D's own testing shows a range from 65.4 to 86.7 MPa tensile strength depending on orientation, which is worth factoring into part design for load-bearing applications.
Yes. TENSILE Shark Grey is compatible with the Monocure3D CustomMix system, which allows colour toners and functional additives to be blended into the resin base.
It works with any MSLA or DLP resin printer. Recommended layer height is 30 to 200 microns depending on printer resolution and application requirements.
Keep it at room temperature in a dark, ventilated space away from direct sunlight. After printing, store used resin in a closed, opaque bottle and don't mix it with new resin. Wear gloves and a mask when handling it, and wash any skin or eye contact with plenty of water.
Unopened bottles can be returned, though you'll cover the return shipping if it's a change of mind. Any defective bottle is covered by a free return and refund.
Yes. 3D Cast is Monocure3D's official Australian distributor, so you're getting genuine TENSILE Shark Grey with local support, not a grey import.
