Phrozen RPG Lychee Beige 3D Printer Resin

Phrozen RPG Lychee Beige 3D Printer Resin: Tabletop Miniature Resin

Phrozen RPG Lychee Beige is a purpose-built MSLA miniature resin in a warm matte beige tone, formulated for tabletop gaming figures, character sculpts, and collectible models. It shares the same miniature-optimised engineering as the RPG Resin line, with the beige colour adding specific advantages for painters working with warm or neutral base schemes.

The beige matte finish sits in a warm mid tone that makes fine surface detail, support contact points, and layer artefacts straightforward to identify during post-processing inspection without the eye strain of high chroma colours. For painters who prime directly over the natural resin colour or use zenithal techniques, the warm beige base reduces the number of primer coats needed and produces cleaner results under light colour schemes than starting from a cold grey. The matte surface texture also improves primer and paint adhesion compared to gloss or semi-gloss resin finishes.

RPG Lychee Beige is endorsed by Lychee Slicer, with pre-tuned print profiles available for all major Phrozen printers. This eliminates the time typically required to dial in a new resin: once the printer is selected in Lychee, exposure time and lift speed are pre-configured. The resin is also compatible with Chitubox profiles for operators not using Lychee.

The formulation delivers notched Izod impact strength of 56.2 J/m and 35.5% elongation, which is the combination that distinguishes RPG Resin from standard high detail resins. Standard miniature resins optimise for detail at the expense of toughness, producing parts with sharp geometry that snap under the handling, transport, and repeated gameplay contact that gaming miniatures receive. RPG Lychee Beige absorbs and deflects that stress through controlled flex rather than fracture. Support tips as fine as 0.08 mm remove cleanly with minimal scarring, reducing post-processing time on fragile parts.

Compatible with all 405 nm LCD and MSLA printers from 4K to 16K. On 8K machines such as the Phrozen Sonic Mini 8KS or Sonic Mighty 8K, RPG Lychee Beige delivers 8K-level surface detail with the mechanical durability the miniature gaming workflow demands.

• Resin type: MSLA photopolymer, miniature optimised
• Colour: Beige (warm matte)
• Volume: 1 kg
• Recommended layer height: 30–100 µm
• Notched Izod impact: 56.2 J/m
• Elongation at break: 35.5%
• Support tip compatibility: 0.08 mm
• Slicer profiles: Lychee Slicer (endorsed), Chitubox
• Compatible printers: All 405 nm LCD and MSLA printers

3D Cast is Australia's official Phrozen distributor, stocking genuine RPG Lychee Beige resin with fast shipping Australia wide and direct product support.