Phrozen Tough PLA Filament Gray
Phrozen Tough PLA Filament Gray is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Returns
Returns
Phrozen Tough PLA Filament Gray
Phrozen Tough PLA Filament, Gray
Phrozen Tough PLA is a 1.75 mm FDM filament designed for engineers, makers, and small businesses that need functional printed parts with better impact resistance and durability than standard PLA delivers. It retains the low-warp, low-odour, and easy-print characteristics of standard PLA while producing parts that handle mechanical stress, repeated handling, and moderate load without cracking or deforming.
Standard PLA is brittle under impact and prone to cracking when flexed. Tough PLA addresses this by modifying the polymer structure to absorb impact energy rather than fracture. The result is a filament that prints like PLA but produces parts closer in behaviour to ABS for everyday functional applications, without the warping, odour, or enclosure requirement that ABS demands.
Phrozen Tough PLA runs at a recommended nozzle temperature of 200 to 230°C and a bed temperature of 40 to 60°C. It is compatible with standard brass nozzles and works on open-frame and enclosed FDM printers including the Phrozen ARCO. No enclosure is required. The 1.75 mm diameter is consistent throughout the spool, contributing to reliable extrusion and even layer adhesion across the full print.
Common applications include functional prototypes, jigs and fixtures, structural brackets, mechanical housings, workshop tools, educational projects, and general-purpose parts where standard PLA is not durable enough. The gray colourway delivers a clean finish suitable for visual models and prototype presentations alongside functional use.
3D Cast is Australia’s official Phrozen distributor. Phrozen Tough PLA ships from Australian stock with genuine product quality and local support.
Specifications
Material is Tough PLA in gray, supplied as a 1 kg spool at 1.75 mm diameter. Recommended nozzle temperature is 200 to 230°C with a bed temperature of 40 to 60°C. Compatible with most FDM printers supporting 1.75 mm filament including the Phrozen ARCO.
TOUGH PLA AT A GLANCE
-
01Up to 200 mm/s
Nozzle 200 to 230 degrees Celsius
-
02Enhanced toughness
Reduced breakage on fine features and load-bearing sections
-
03No enclosure
Prints reliably in open-frame setups
-
048 colours
Chroma Kit compatible
Phrozen Tough PLA Specifications
Full specifications confirmed by Phrozen Technology. Stocked by 3D Cast, Australia's official Phrozen distributor.
Phrozen Tough PLA Specifications
Full specifications confirmed by Phrozen Technology. Stocked by 3D Cast, Australia's official Phrozen distributor.
3D Cast is Australia's official Phrozen distributor. Phrozen Tough PLA is stocked in Bairnsdale, Victoria and ships from Australian stock. Our team uses Phrozen filament daily and can assist with print settings, slicer profiles, and Chroma Kit configuration. No grey imports, no overseas support lines.
Also available
Need faster throughput?
Phrozen High Speed PLA is formulated for CoreXY printers at speeds up to 600 mm/s. 8 colours, identical print settings. The recommended filament for the Phrozen Arco.
Phrozen High Speed PLA
Formulated for CoreXY printers at speeds up to 600 mm/s. Tensile strength 55 MPa, dimensional accuracy plus or minus 0.02 mm. 8 colours, identical print settings. Nozzle 190 to 220 degrees C, PEI bed 45 to 60 degrees C.
Shop High Speed PLAPhrozen Arco FDM 3D Printer
CoreXY FDM printer with a 300 x 300 x 300 mm build volume, 600 mm/s top speed, and Klipper firmware. The printer Tough PLA is designed to run on.
View the ArcoPhrozen Tough PLA: Frequently Asked Questions
Phrozen Tough PLA is engineered for functional parts that need to survive handling and load without breaking. Common applications include snap-fit enclosures, brackets, clips, tooling jigs, and any geometry with thin walls or fine features where standard PLA would snap under stress.
Standard PLA is brittle and tends to snap at thin walls, sharp features, and load-bearing sections. Tough PLA uses a modified formulation that maintains structural integrity across the same geometry, printing at slightly higher nozzle temperatures (200 to 230 degrees Celsius versus 190 to 220 for standard PLA) with improved impact resistance and no enclosure required.
No. Phrozen Tough PLA prints reliably in open-frame setups, differentiating it from engineering filaments like ABS, ASA, and polycarbonate which require enclosed thermal environments to prevent warping.
Yes. Multi-colour functional parts can be printed without per-colour profile adjustments across the 8 available colours.
Tough PLA offers easier printing and better surface finish than ABS, with less warping and no enclosure required. Compared to PETG, it is stiffer and easier to tune, while still delivering improved toughness over standard PLA.
Yes. Phrozen Tough PLA is stocked in Australia by 3D Cast, the official Australian Phrozen distributor. Orders ship from our Bairnsdale, Victoria warehouse across all 8 colours with no minimum order quantities.
Let customers speak for us
Cannot praise the service enough. The order was dispatched the same day as ordered and promptly received. All queries since the order have been responded to in a very timely manner.
Have printed four lots of dental arches with this resin and have had successful prints each time with no problems. Cheaper than the previous high temp resin I was using and more successful print quality so far. Would buy again.
Works perfectly as advertised. Easy to install, even with fat fingers. Good price, excellent service as always from the team at 3Dcast. Thank you.
Easy to communicate with and order fulfillment was prompt. I’ll be back!!
Really user friendly - easy to work with (even in very small quantities and very tight spots). Cures almost instantaneously under the supplied UV torch and then easy to sand back, scribe etc. A must have product for scale modeling!
Delivered super fast, product works as described. Very happy
Delivered super fast, product works as described. Very happy
service and delivery is very quick and efficient.
My husband was so happy with it thank you again.
And youare so helpful with any questions
I’ve tested plenty of resins in the past, but Resione Tough74 v2 is on a completely different level. The material properties are incredible - it’s the perfect balance of rigidity and toughness. I’m using it for articulated garage resin kits, and the results are flawless. If you are tired of brittle prints and want something that actually feels like a manufactured product, this is it!
I have used the Phrozen 8K resin before, so I know how good a product it is. Delivery was fast. Sadly, whoever delivered it left it in the foyer of my apartment building without even buzzing me. Nothing to do with 3D cast but I hate to think what would have happened if a kid had got their hands on it.
Simple replacement part. Easy install. Comes with replacement tape included. Good product.
Ready to order?
3D Cast is Australia's official Phrozen distributor. Australian stock, full warranty, local support.
Back to top — Add to Cart