Phrozen AnyCast Castable 3D Printer Resin

Phrozen AnyCast Castable is a high wax content MSLA and DLP castable resin formulated for jewellers, goldsmiths, silversmiths, and dental professionals who use lost wax investment casting workflows. It prints on any 405 nm resin 3D printer and goes directly into standard gypsum-bonded investment for casting in gold, silver, platinum, and bronze alloys.

Wax content determines how completely the resin burns out of the investment mould during the casting process. A higher wax ratio means the resin behaves more like traditional carving wax during burnout, leaving minimal ash and carbon residue in the mould cavity. Residue in the cavity transfers directly to the surface of the cast piece as pitting, inclusions, or surface roughness. AnyCast contains 60% wax content, which is the defining property behind its clean burnout performance.

AnyCast Castable is compatible with 405 nm MSLA and DLP resin 3D printers. It is not restricted to Phrozen hardware — any 405 nm printer that accepts third-party resins can print AnyCast. Validated print settings for specific Phrozen printers are available through the Phrozen DS Slicer resin profile library. For other 405 nm printers, use the printer manufacturer's recommended starting settings for castable resins and adjust exposure time to suit your specific setup.

AnyCast reproduces fine surface geometry at the detail level jewellery work requires: filigree structures, milgrain edges, pavé settings, fine engraving, and thin wall sections all transfer from digital file to printed master without simplification. Resolution at the print stage is determined by the XY resolution of the printer used — a 22 µm or 34 µm printer will resolve finer detail than a 50 µm printer. The resin formulation does not introduce additional softening or surface artefacts that reduce detail beyond the printer's native resolution.

AnyCast is compatible with standard gypsum-bonded investment materials used in jewellery and dental casting. No specialist investment is required. Follow your investment manufacturer's recommended burnout cycle for castable resin patterns, as burnout time and temperature profiles may differ from traditional wax.

AnyCast is compatible with gold, silver, platinum, and bronze casting alloys. It is suitable for both precious metal jewellery production and non-precious casting applications. Always verify casting parameters with your specific alloy supplier if you are working outside standard jewellery alloys.

Yes. AnyCast is suitable for dental indirect casting workflows where a castable resin master is required. AnyCast is formulated for 405 nm printers, which covers a wide range of MSLA and DLP printers. Phrozen Dental printers including the CS+ and LS+ operate at 385 nm. AnyCast will print on these printers but requires adjusted exposure settings rather than using the default validated resin profiles. Test and validate exposure parameters before committing to a clinical casting workflow. Verify burnout cycle parameters and investment compatibility with your dental casting materials supplier, as dental investment products may specify different burnout profiles to jewellery investment.

A CAD-designed piece printed in AnyCast and cast directly produces dimensional accuracy that matches or exceeds hand-carved wax masters. The digital file can be reprinted and recast without the skill variation that hand carving introduces between pieces. For custom jewellery production, this reduces the labour component of each piece while maintaining or improving accuracy.

Store AnyCast Castable below 25°C in a cool, dark location away from direct light exposure. Avoid freezing. Shake or stir thoroughly before each use to ensure consistent wax content distribution throughout the bottle — wax content resins can stratify during storage. Shelf life is typically 12 months from manufacture when stored correctly. Use nitrile gloves and eye protection when handling uncured resin. Refer to the product SDS for full handling, first aid, and disposal requirements.

Yes. Phrozen AnyCast Castable is available in Australia through 3D Cast, the official Australian distributor for Phrozen Technology. All stock is held locally for fast shipping. 3D Cast's team can assist with resin selection, print settings, and castable resin workflow questions. Contact 3D Cast directly for technical support.