Phrozen Dental XL 4K Plus 3D Printer Complete Production System
What's Included
Phrozen Dental XL 4K Plus 3D Printer Complete Production System is backordered and will ship as soon as it is back in stock.
Phrozen Dental XL 4K Plus Complete Production System: Full Workflow Lab Dental 3D Printing Bundle
The Phrozen Dental XL 4K Plus Complete Production System is the most comprehensive XL 4K Plus bundle, designed for Australian dental laboratories that need a fully integrated large-format dental 3D printing workflow from a single purchase. It combines the XL 4K Plus printer, Phrozen Wash+ washing station, Phrozen Cure+ curing unit, Phrozen Heat and Mix resin preparation station, and three validated dental resins, covering every stage from resin preparation through to a finished cured part.
The XL 4K Plus delivers 52 µm XY resolution using a 9.3 inch 4K mono-LCD across a 200 x 125mm build plate, printing six to eight full-arch dental models in 35 minutes print time. The Heat and Mix station brings temperature-controlled resin preparation into the production workflow, ensuring resins are at the correct viscosity before printing regardless of ambient conditions, essential for laboratories running multiple print cycles throughout the day. The Wash+ handles post-print cleaning with dual tank washing and five-minute cycle times that keep pace with high output volumes. The Cure+ provides triple-wavelength curing at 365, 385, and 405nm with a 60°C heated enclosure and validated profiles for over 15 dental materials.
The bundle includes one kilogram each of Phrozen Dental Study Model Resin, Phrozen Water-Washable Dental Model Resin, and Phrozen Dental Ortho Model Resin, all validated for the XL 4K Plus. Every component is validated to work together as a complete production workflow.
3D Cast is Australia's official Phrozen distributor, stocking the Phrozen Dental XL 4K Plus Complete Production System with fast shipping Australia wide and direct technical support.
Phrozen Dental XL 4K Plus 3D Printer — Specifications
Technical specifications from official Phrozen Dental data
Phrozen Dental XL 4K Plus 3D Printer — Specifications
Technical specifications from official Phrozen Dental data
Ready to order?
Australia's official Phrozen distributor — genuine product, local stock, expert support.
Add to CartWhat's in This Bundle
3D Cast is the official Australian distributor for Phrozen Technology. That means genuine product, local stock, same-day dispatch, and expert support from a team that prints daily. No grey imports, no international shipping wait times — just fast, reliable supply for Australian dental practices and labs.
Ready to order?
Australia's official Phrozen distributor — genuine product, local stock, expert support.
Add to CartGuides & Resources
Helpful guides for getting the best results with this resin.
Not sure which bundle is right for your clinic?
Talk to us about your workflow and we will help you choose the right printer and resin combination.
Frequently Asked Questions
The bundle includes the Phrozen Dental XL 4K Plus 3D Printer, Phrozen Heat and Mix Resin Mixing Station, Phrozen WASH+ Dental Washing Station, Phrozen Dental Cure+ Curing Unit, Phrozen Dental Study Model Resin 1kg, Phrozen Water-Washable Dental Model Resin 1kg, and Phrozen Dental Ortho Model Resin 1kg.
The Heat and Mix station prepares resin before printing by warming it to the correct temperature and mixing it automatically. This ensures consistent viscosity across production sessions, which is critical in high volume laboratory environments where multiple print runs are completed throughout the day.
No. This bundle covers every stage from resin preparation through to a finished cured part. You will need IPA for the WASH+ washing station, which is not included.
The XL 4K Plus is designed for high throughput production with a large format build volume of 195 x 140 x 200 mm, suited to full arch workflows and high model counts per print cycle. It is the largest printer in the Phrozen Dental range available through 3D Cast.
The WASH+ supports three methods. A two-stage dirty IPA then clean IPA wash, separation of FDA biocompatible parts from non-FDA parts in a single cycle, and double plate washing for up to 24 dental models per cycle.
The Cure+ has validated curing profiles for 15 or more dental materials including surgical guides, models, splints, and biocompatible resins. It uses triple wavelength curing at 365, 385, and 405 nm with a heated 60 degree enclosure.
The XL 4K Plus is validated with the full range of Phrozen dental resins stocked at 3D Cast, including Dental Study Model Resin, Water-Washable Dental Model Resin, Dental Ortho Model Resin with a 220°C glass transition temperature for thermoforming, and Monocure3D PRECISE+ and Thermo Resin. All validated resins are available in local Australian stock at 3D Cast.
Yes. 3D Cast stocks a broad range of Phrozen dental resins including surgical guide, castable, and biocompatible formulations. Contact 3D Cast to discuss which materials suit your production applications.
3D Cast is the official Australian distributor for Phrozen Technology, providing local expert support, access to spare parts, and stocked consumables without international shipping wait times.
Phrozen provides video tutorials covering printer setup, resin mixing, printing, washing, curing, and production workflows through the Phrozen support library. 3D Cast also provides direct setup and workflow support as Australia's official Phrozen distributor — contact the 3D Cast team for hands-on guidance specific to your laboratory environment.
