Phrozen 7.1" LCD Frame Tape Mini 8k & 8Ks
Phrozen 7.1" LCD Frame Tape Mini 8k & 8Ks is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Returns
Returns
Warranty Information
Warranty Information
Phrozen 7.1" LCD Frame Tape Mini 8k & 8Ks
Phrozen 7.1-Inch LCD Frame Tape: Mini 8K and Mini 8KS
Phrozen 7.1-Inch LCD Frame Tape is the genuine OEM adhesive sealing tape for the Phrozen Sonic Mini 8K and Sonic Mini 8KS, pre-cut to fit the 7.1-inch LCD panel used in both printers. LCD frame tape is the gasket layer between the LCD panel and the printer frame — it seals the LCD in position, prevents liquid resin from reaching internal electronics through the gap around the screen, and maintains the LCD alignment that determines curing accuracy.
Phrozen recommends replacing the frame tape whenever the LCD screen is replaced. Reusing the original tape after removal compromises the seal quality because the adhesive does not re-bond with the same strength or uniformity. Using a generic alternative that has not been cut to the precise dimensions of the Mini 8K or Mini 8KS frame risks gaps in the seal at the corners or edges, which are the entry points for resin ingress during a vat failure or spill event. The genuine pre-cut Phrozen tape eliminates both risks.
At $21 per set, LCD frame tape is the lowest cost component in an LCD replacement. Skipping it to save cost introduces the risk of resin reaching the printer's ribbon cable and mainboard connections, which are significantly more expensive to replace than the tape itself.
- Compatible printers: Phrozen Sonic Mini 8K, Sonic Mini 8KS
- LCD size: 7.1 inches
- Quantity: 1 set (pre-cut)
- Replaces: Old frame tape during LCD replacement
3D Cast is Australia's official Phrozen distributor, stocking genuine Phrozen LCD frame tape with fast shipping Australia wide.
You may also need
Specifications
Specifications for the Phrozen 7.1" LCD Frame Tape.
Specifications
Specifications for the Phrozen 7.1" LCD Frame Tape.
3D Cast is the official Australian distributor for Phrozen Technology, stocking genuine Phrozen spare parts for the full Phrozen printer range from our Bairnsdale, Victoria warehouse.
Frequently Asked Questions
Yes. Phrozen recommends replacing the frame tape whenever the LCD screen is replaced. Reusing the original tape after removal compromises the seal quality because the adhesive does not re-bond with the same strength or uniformity.
It's the gasket layer between the LCD panel and the printer frame. It seals the LCD in position, prevents liquid resin from reaching internal electronics through the gap around the screen, and maintains the LCD alignment that determines curing accuracy.
A generic alternative not cut to the precise dimensions of the Mini 8K or Mini 8KS frame risks gaps in the seal at the corners or edges, which are the entry points for resin ingress during a vat failure or spill event. Genuine pre-cut tape eliminates this risk.
Yes. At a low cost relative to the LCD screen itself, frame tape is the cheapest component in the service and the one most likely to be skipped, with the greatest downstream risk if it is.
Yes. Both printers use the same 7.1-inch LCD frame dimensions.
Yes. 3D Cast is Phrozen's official Australian distributor, stocking the genuine OEM pre-cut tape.
Let customers speak for us
This stuff is top notch, you are getting what you pay for. I am new to 3d printing, my friend has been doing it for tears and he is very impressed
Cannot praise the service enough. The order was dispatched the same day as ordered and promptly received. All queries since the order have been responded to in a very timely manner.
Have printed four lots of dental arches with this resin and have had successful prints each time with no problems. Cheaper than the previous high temp resin I was using and more successful print quality so far. Would buy again.
Works perfectly as advertised. Easy to install, even with fat fingers. Good price, excellent service as always from the team at 3Dcast. Thank you.
Easy to communicate with and order fulfillment was prompt. I’ll be back!!
Really user friendly - easy to work with (even in very small quantities and very tight spots). Cures almost instantaneously under the supplied UV torch and then easy to sand back, scribe etc. A must have product for scale modeling!
Delivered super fast, product works as described. Very happy
Delivered super fast, product works as described. Very happy
service and delivery is very quick and efficient.
My husband was so happy with it thank you again.
And youare so helpful with any questions
Ready to order?
3D Cast is Australia's official Phrozen distributor. Genuine parts, Australian stock, local support.
Back to top — Add to Cart