Phrozen Wash & Cure Kit
Phrozen Wash & Cure Kit is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Returns
Returns
Warranty Information
Warranty Information
Phrozen Wash & Cure Kit
Phrozen Wash & Cure Kit: Resin 3D Print Post-Processing Station
The Phrozen Wash & Cure Kit is a combined washing and curing station for resin 3D prints, integrating an 8-litre vortex wash tank and a 405 nm UV curing chamber into a single post-processing workflow. It is designed for hobbyists, miniature painters, engineers, and dental professionals who want a dedicated, consistent post-processing setup rather than improvised IPA containers and improvised UV sources.
The wash tank uses a high-speed propeller to generate a vortex in the cleaning solution that circulates around the model, removing uncured resin from surfaces and internal cavities without the mechanical abrasion that brushing introduces. The vortex action is effective on intricate geometry where brush cleaning is impractical — fine miniature detail, lattice structures, dental models, and overhanging surfaces all benefit from circulation-based washing. The adjustable timer gives control over wash duration for different resin types and model geometries.
The curing chamber delivers 360° UV coverage through a rotating turntable that ensures all surfaces of the model receive equal light exposure. Uneven curing — which occurs when models are cured under a single-direction UV source or in sunlight — produces mechanical property variation across the part: fully cured surfaces alongside under-cured regions that remain tacky or weak. The 360° rotating curing approach addresses this. The chamber accommodates models up to Ø25 x 23.5 cm and includes a fan-assisted drying mode that removes cleaning solvent from the model surface before UV curing begins, which prevents solvent residue from interfering with the cure.
Three operating modes are available: dry only, cure only, and dry then cure sequentially. The sequential mode is the standard workflow for resin prints going directly from the wash tank to the curing chamber.
3D Cast is Australia's official Phrozen distributor, stocking the genuine Phrozen Wash & Cure Kit with fast shipping Australia wide and direct support for resin printing workflows including dental applications.
WASH AND CURE KIT AT A GLANCE
-
018L wash tank
Vortex propeller, 0 to 30 min timer
-
02360° UV cure
Rotating turntable, 405 nm LEDs
-
03Fan-assisted drying
Removes solvent before UV exposure
-
043 modes
Dry, cure, or dry then cure
Accessories and cleaning chemistry
Phrozen Wash and Cure Kit Specifications
Full specifications for both the wash station and curing station components.
Phrozen Wash and Cure Kit Specifications
Full specifications for both the wash station and curing station components.
3D Cast is Australia's official Phrozen distributor. The Wash and Cure Kit is stocked in Bairnsdale, Victoria and ships from Australian stock. Our team uses Phrozen post-processing hardware daily and can assist with workflow questions, resin compatibility, and cleaning solution selection. No grey imports, no overseas support lines.
Phrozen Wash and Cure Kit: Frequently Asked Questions
The wash tank is compatible with IPA (isopropyl alcohol) and purpose-made resin cleaning solutions such as Monocure3D Resinaway. Resinaway is a safer alternative to IPA with lower flammability and longer working life before replacement. We stock Monocure3D Resinaway at 3D Cast.
Wash time depends on the resin type and the complexity of the model geometry. Most standard resins on simple models require 3 to 5 minutes. Models with deep internal cavities, fine detail, or complex lattice structures may require longer. The 0 to 30 minute timer allows you to tune the cycle for your specific workflow.
Residual cleaning solvent on the model surface during UV exposure can inhibit full surface cure, leaving a tacky layer. The fan-assisted drying mode removes solvent before UV starts, which produces a cleaner surface cure. The dry then cure sequential mode is the recommended workflow for prints going directly from wash to cure.
The curing chamber accommodates models up to Ø25 x 23.5 cm. This covers standard desktop resin printer build volumes including the Phrozen Sonic Mini 8KS, Sonic Mighty 12K, and Sonic Mighty Revo 16K. For large format printers like the Mega 8K series, the Mega Cure S is the appropriate curing station.
Yes. Over-curing causes brittleness in many resin formulations, reducing impact resistance and making thin sections more prone to snapping. The recommended approach is to follow the resin manufacturer's cure time guidelines and start conservatively. The 0 to 2 hour timer allows precise control. Most standard hobby resins require 2 to 6 minutes of UV exposure for adequate surface cure.
Used IPA or Resinaway containing dissolved uncured resin should not be poured down the drain. The recommended disposal method is to expose the used solution to sunlight or UV light until the suspended resin cures and settles, then filter out the solid resin, and dispose of the clean solvent according to your local chemical disposal guidelines. Contact your local council for disposal advice.
The Wash and Cure Kit is suited for standard desktop resin printer build volumes. The wash tank accommodates models up to 21.8 x 12.3 x 23.5 cm and the curing chamber accommodates models up to Ø25 x 23.5 cm, covering the Phrozen Sonic Mini 8KS, Sonic Mighty 12K, Sonic Mighty Revo 16K, and Sonic Mighty Revo 14K. For Mega series printers, the Wash Mega S and Mega Cure S are the appropriate post-processing stations.
Yes. The Phrozen Wash and Cure Kit is stocked in Australia by 3D Cast, the official Australian Phrozen distributor. Ships from our Bairnsdale, Victoria warehouse with no international shipping wait.
Let customers speak for us
Cannot praise the service enough. The order was dispatched the same day as ordered and promptly received. All queries since the order have been responded to in a very timely manner.
Have printed four lots of dental arches with this resin and have had successful prints each time with no problems. Cheaper than the previous high temp resin I was using and more successful print quality so far. Would buy again.
Works perfectly as advertised. Easy to install, even with fat fingers. Good price, excellent service as always from the team at 3Dcast. Thank you.
Easy to communicate with and order fulfillment was prompt. I’ll be back!!
Really user friendly - easy to work with (even in very small quantities and very tight spots). Cures almost instantaneously under the supplied UV torch and then easy to sand back, scribe etc. A must have product for scale modeling!
Delivered super fast, product works as described. Very happy
Delivered super fast, product works as described. Very happy
service and delivery is very quick and efficient.
My husband was so happy with it thank you again.
And youare so helpful with any questions
I’ve tested plenty of resins in the past, but Resione Tough74 v2 is on a completely different level. The material properties are incredible - it’s the perfect balance of rigidity and toughness. I’m using it for articulated garage resin kits, and the results are flawless. If you are tired of brittle prints and want something that actually feels like a manufactured product, this is it!
I have used the Phrozen 8K resin before, so I know how good a product it is. Delivery was fast. Sadly, whoever delivered it left it in the foyer of my apartment building without even buzzing me. Nothing to do with 3D cast but I hate to think what would have happened if a kid had got their hands on it.
Simple replacement part. Easy install. Comes with replacement tape included. Good product.
Ready to order?
3D Cast is Australia's official Phrozen distributor. Australian stock, full warranty, local support.
Back to top — Add to Cart