Phrozen Wash Mega S
Phrozen Wash Mega S is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Specifications
Specifications
Returns
Returns
Warranty Information
Warranty Information
Phrozen Wash Mega S
Phrozen Wash Mega S: Large Format Resin Wash Station
The Phrozen Wash Mega S is a large format resin wash station with a 25-litre capacity, designed for production workflows, large format printers, and batch cleaning applications where standard compact wash stations are too small to accommodate the build volume. It is the wash station counterpart to the Mega Cure S in the Phrozen large format post-processing range.
The 25-litre tank accommodates build plates up to 15 inches (Mega 8K series) as well as 13.6-inch, 13.3-inch, and 12.8-inch format plates, which covers the full range of current large format Phrozen printer build platforms. A dual-speed double vortex system operates at 300 rpm on high and 275 rpm on low, with an automatic direction reversal every minute that alternates the vortex rotation to achieve even resin removal from all surfaces of the model. Models with complex internal geometry, deep recesses, and undercut surfaces benefit most from the alternating vortex approach, as a single-direction vortex creates stagnant zones in recesses that a reversing system continues to agitate.
A built-in side drain valve allows safe and controlled disposal of used cleaning solution without tilting or pouring from the full 25-litre tank. At 25 litres of IPA or Resinaway, manual pouring presents a significant spill risk; the valve eliminates this. The adjustable timer and speed settings allow the wash cycle to be tuned for different resin types and model geometries.
3D Cast is Australia's official Phrozen distributor, stocking the genuine Phrozen Wash Mega S with fast shipping Australia wide and direct support for dental, production, and professional resin workflows.
WASH MEGA S AT A GLANCE
-
0125L capacity
Supports build plates up to 15 inches
-
02Double vortex
Auto-reversal every minute, dual speed
-
03Side drain valve
Safe disposal without manual pouring
-
04300 rpm
High speed vortex
Phrozen Wash Mega S Specifications
Full specifications confirmed by Phrozen Technology. Stocked by 3D Cast, Australia's official Phrozen distributor.
Phrozen Wash Mega S Specifications
Full specifications confirmed by Phrozen Technology. Stocked by 3D Cast, Australia's official Phrozen distributor.
3D Cast is Australia's official Phrozen distributor. The Wash Mega S is stocked in Bairnsdale, Victoria and ships from Australian stock. Our team runs large format Phrozen printers and can assist with post-processing workflow questions, cleaning solution selection, and wash parameter tuning for different resin types. No grey imports, no overseas support lines.
Phrozen Wash Mega S: Frequently Asked Questions
The Wash Mega S accommodates build plates up to 15 inches, covering the full Phrozen Mega 8K series and all other Phrozen large format printers with 13.6-inch, 13.3-inch, and 12.8-inch build platforms. It is paired with the Mega Cure S for a complete large format post-processing workflow.
A single-direction vortex creates stagnant zones in deep recesses, internal cavities, and under overhanging surfaces. Automatic direction reversal alternates the vortex rotation every minute, continuously agitating the cleaning solution from multiple directions. This achieves more even resin removal from complex geometry including internal channels, dental model detail, and lattice structures.
The Wash Mega S is compatible with IPA (isopropyl alcohol) and purpose-made resin cleaning solutions including Monocure3D Resinaway. Resinaway has a longer working life than IPA before replacement and lower flammability. We stock Monocure3D Resinaway at 3D Cast.
At 25 litres of IPA or Resinaway, manually tilting and pouring from the tank presents a significant spill risk. The built-in side drain valve allows safe, controlled disposal of used cleaning solution without lifting or tilting the tank. This is a practical safety and workflow consideration for high-volume post-processing setups.
Cleaning solution becomes saturated with dissolved uncured resin over time and loses effectiveness. Signs of exhaustion include a dark or heavily discoloured solution, a tacky or cloudy finish on washed parts, and a strong resin smell that persists after washing. Resinaway typically lasts longer than IPA before needing replacement. Expose used solution to sunlight to cure suspended resin before disposal.
Yes. The dual-speed vortex and adjustable timer allow the wash parameters to be tuned for different resin types. Engineering-grade and dental resins often require longer wash times and may benefit from the high-speed vortex setting to remove viscous uncured material from fine features and internal surfaces. Our team can advise on wash parameters for specific resin types.
Standard compact wash stations typically hold 3 to 8 litres and cannot physically accommodate build plates from 15-inch large format printers. The Wash Mega S holds 25 litres, supports build plates up to 15 inches, and uses a dual-speed double vortex with auto-direction reversal. It is designed specifically for large format printer output where compact stations are too small.
Yes. The Phrozen Wash Mega S is stocked in Australia by 3D Cast, the official Australian Phrozen distributor. Ships from our Bairnsdale, Victoria warehouse via courier due to its size and weight.
Let customers speak for us
Cannot praise the service enough. The order was dispatched the same day as ordered and promptly received. All queries since the order have been responded to in a very timely manner.
Have printed four lots of dental arches with this resin and have had successful prints each time with no problems. Cheaper than the previous high temp resin I was using and more successful print quality so far. Would buy again.
Works perfectly as advertised. Easy to install, even with fat fingers. Good price, excellent service as always from the team at 3Dcast. Thank you.
Easy to communicate with and order fulfillment was prompt. I’ll be back!!
Really user friendly - easy to work with (even in very small quantities and very tight spots). Cures almost instantaneously under the supplied UV torch and then easy to sand back, scribe etc. A must have product for scale modeling!
Delivered super fast, product works as described. Very happy
Delivered super fast, product works as described. Very happy
service and delivery is very quick and efficient.
My husband was so happy with it thank you again.
And youare so helpful with any questions
I’ve tested plenty of resins in the past, but Resione Tough74 v2 is on a completely different level. The material properties are incredible - it’s the perfect balance of rigidity and toughness. I’m using it for articulated garage resin kits, and the results are flawless. If you are tired of brittle prints and want something that actually feels like a manufactured product, this is it!
I have used the Phrozen 8K resin before, so I know how good a product it is. Delivery was fast. Sadly, whoever delivered it left it in the foyer of my apartment building without even buzzing me. Nothing to do with 3D cast but I hate to think what would have happened if a kid had got their hands on it.
Simple replacement part. Easy install. Comes with replacement tape included. Good product.
Ready to order?
3D Cast is Australia's official Phrozen distributor. Australian stock, full warranty, local support.
Back to top — Add to Cart